

Register backplane
All material related to the 16bcfs project
- Size
- 119.4 × 485.1 mm
- Copper layers
- 4
- Thickness
- 1.69 mm
- Parts
- 105
- Nets
- 149
- Pads
- 878
- Tracks, vias
- 3,987, 1,673
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Nov 2023
- Updated
- 20 Apr 2025
Overview
Register backplane is an open-source printed circuit board by eryjus, from the eryjus/16bcfs repository on GitHub. It is a 4-layer board of 119.4 × 485.1 mm with 105 parts on 149 nets, routed with 3,987 tracks and 1,673 vias.
Its parts include 79 connectors, 25 capacitors and 1 resistor.
README
README.md16-Bit Computer From Scratch
This repository contains the complete works associated with the 16-Bit Computer From Scrath (16bcfs) project.
Videos
I am documenting my 16-Bit Computer build in video form. You can find the entire playlist here.
License
See LICENSE.md.
Build System
I use tup as my primary build system. I usually will wrap tup in make commands. You can find tup here. I simply find tup to more reliable detect changed sources with less work.
Qt6_DIR Environment Variable
The Qt6_DIR Environment Variable needs to point to the installation location of Qt6, for example ~/Qt/6.6.0/gcc_64/. Your installation location may be different, so copy-and-paste is not advised.
EEPROM Programmer
I do not have a commercial EEPROM programmer. I use the TommyPROM programmer. You can find all the relevant information on TommyPROM here. In Linux, I use minicom as the interface. Hint: use sudo minicom -s to set up the defaults.
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 47uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +8 |
| 24 | Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J48, J55, J56, J57, J58, J59, J60, J61, J62, J63, J64, J65, J66, J67, J68, J69 +8 |
| 12 | Control Signals | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6, J43, J44, J45, J46, J47, J49, J50, J51, J52, J53, J54 |
| 8 | ALU Bus A | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3, J10, J15, J20, J25, J30, J35, J40 |
| 8 | ALU Bus B | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4, J11, J16, J21, J26, J31, J36, J41 |
| 8 | Address Bus 1 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1, J8, J13, J18, J23, J28, J33, J38 |
| 8 | Address Bus 2 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J2, J9, J14, J19, J24, J29, J34, J39 |
| 8 | Main Bus | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J5, J12, J17, J22, J27, J32, J37, J42 |
| 2 | USB_A | Connector_USB:USB_A_Stewart_SS-52100-001_Horizontal | J78, J79 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J77 |
More from eryjus/16bcfs
11- 4 layers238.8 × 236.2 mm

- 4 layers86.5 × 43.2 mm

- 4 layers88.9 × 43.2 mm

- 4 layers43.2 × 21.6 mm

- 2 layers42.2 × 14.2 mm

- 4 layers43.2 × 40.6 mm

- 2 layers21.8 × 14.2 mm

- 2 layers11.7 × 14.2 mm

- 2 layers20.3 × 43.2 mm

- 2 layers20.3 × 7.6 mm

- 2 layers21.6 × 15.2 mm

Similar boards
- 4 layers223.3 × 120.1 mm

ISA FPGA v2
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
105 parts78 - 4 layers283.2 × 131.5 mm

- 4 layers133 × 58 mm

Motordriver
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
105 parts71 - 4 layers88.1 × 34.5 mm

Servid rp2040-hdmi proto rev1
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
105 parts33MIT - 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers409.6 × 20 mm

UniMixFeeders
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
105 parts6 - 4 layers40.2 × 48.8 mm

F8-fc h7 rev
victorhook/f8-fc
f8 fc is a fully open source AIO flight controller with 8 motor drives
105 parts6
Questions
How big is the Register backplane PCB?
It measures 119.4 × 485.1 mm and has 4 copper layers, 1.69 mm thick.
What parts does the Register backplane use?
105 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Register backplane KiCad files?
From the eryjus/16bcfs repository on GitHub, at the commit this page was made from: the board is kicad/projects/16bcfs/register-backplane/register-backplane.kicad_pcb and its schematic kicad/projects/16bcfs/clock-module/adjustable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Register backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask eryjus before reusing the design.