

Bus interconnect
All material related to the 16bcfs project
- Size
- 20.3 × 43.2 mm
- Copper layers
- 2
- Thickness
- 4.69 mm
- Parts
- 3
- Nets
- 16
- Pads
- 48
- Tracks, vias
- 16, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Nov 2023
- Updated
- 20 Apr 2025
Overview
Bus interconnect is an open-source printed circuit board by eryjus, from the eryjus/16bcfs repository on GitHub. It is a 2-layer board of 20.3 × 43.2 mm with 3 parts on 16 nets, routed with 16 tracks and 0 vias.
README
README.md16-Bit Computer From Scratch
This repository contains the complete works associated with the 16-Bit Computer From Scrath (16bcfs) project.
Videos
I am documenting my 16-Bit Computer build in video form. You can find the entire playlist here.
License
See LICENSE.md.
Build System
I use tup as my primary build system. I usually will wrap tup in make commands. You can find tup here. I simply find tup to more reliable detect changed sources with less work.
Qt6_DIR Environment Variable
The Qt6_DIR Environment Variable needs to point to the installation location of Qt6, for example ~/Qt/6.6.0/gcc_64/. Your installation location may be different, so copy-and-paste is not advised.
EEPROM Programmer
I do not have a commercial EEPROM programmer. I use the TommyPROM programmer. You can find all the relevant information on TommyPROM here. In Linux, I use minicom as the interface. Hint: use sudo minicom -s to set up the defaults.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Address Bus 1 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2, J3 |
| 1 | Address Bus 1 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1 |
More from eryjus/16bcfs
11- 4 layers238.8 × 236.2 mm

- 4 layers86.5 × 43.2 mm

- 4 layers119.4 × 485.1 mm

- 4 layers88.9 × 43.2 mm

- 4 layers43.2 × 21.6 mm

- 2 layers42.2 × 14.2 mm

- 4 layers43.2 × 40.6 mm

- 2 layers21.8 × 14.2 mm

- 2 layers11.7 × 14.2 mm

- 2 layers20.3 × 7.6 mm

- 2 layers21.6 × 15.2 mm

Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Bus interconnect PCB?
It measures 20.3 × 43.2 mm and has 2 copper layers, 4.69 mm thick.
What parts does the Bus interconnect use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bus interconnect KiCad files?
From the eryjus/16bcfs repository on GitHub, at the commit this page was made from: the board is kicad/projects/utility/bus-interconnect/bus-interconnect.kicad_pcb and its schematic kicad/projects/16bcfs/clock-module/adjustable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bus interconnect design in my own project?
Its repository states no licence, so its author keeps all rights: ask eryjus before reusing the design.