2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915
2 layers62.4 × 98.6 mm
Sticc14
ErkHal/sticc1453x5 Mechanical macropad PCB. Fully open-source.
- Size
- 62.4 × 98.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 38
- Pads
- 190
- Tracks, vias
- 279, 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Dec 2019
- Updated
- 6 Feb 2020
Overview
Sticc14 is an open-source printed circuit board by ErkHal, from the ErkHal/sticc14 repository on GitHub, published under the MIT licence. It is a 2-layer board of 62.4 × 98.6 mm with 35 parts on 38 nets, routed with 279 tracks and 11 vias.
Its parts include 14 diodes, 14 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdSticc14
3x5 Mechanical macropad PCB. Fully open-source.
Specs
- 14 keys
- Throughhole/SMD diodes
- QMK Compatible
- Uses Pro Micro (Atmega32u4)
Firmware
- Uses QMK: https://qmk.fm/
- Sticc14 repository: https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/sticc14
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | D | keyboard_parts:D_SOD123_axial | D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 13 | KEYSW | Button_Switch_Keyboard:SW_Cherry_MX1A_1.00u_PCB | K0, K1, K2, K3, K4, K5, K6, K7, K8, K9, K10, K11, K13 |
| 4 | VAL** | keyboard_parts:HOLE_M2.6 | HOLE_M2.6, HOLE_M2.6, HOLE_M2.6, HOLE_M2.6 |
| 1 | KEYSW | Button_Switch_Keyboard:SW_Cherry_MX1A_2.00u_PCB | K12 |
| 1 | LOGO | qmk:qmk_powered | G*** |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW_RST1 |
Questions
How big is the Sticc14 PCB?
It measures 62.4 × 98.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sticc14 use?
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sticc14 KiCad files?
From the ErkHal/sticc14 repository on GitHub, at the commit this page was made from: the board is Sticc14.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sticc14 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
- 2 layers50.5 × 67.1 mm
