4 layers160 × 100 mm
2 layers90.7 × 52.5 mm
Driver control
ericbrauer/driver_controlPCB Design for ETD555 group project
- Size
- 90.7 × 52.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 17
- Pads
- 124
- Tracks, vias
- 136, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Jan 2018
- Updated
- 25 Jan 2018
Overview
Driver control is an open-source printed circuit board by ericbrauer, from the ericbrauer/driver_control repository on GitHub. It is a 2-layer board of 90.7 × 52.5 mm with 38 parts on 17 nets, routed with 136 tracks and 0 vias.
It is built around the L293D and LM35DZ. Its parts include 8 resistors, 6 connectors, 4 ICs, 4 diodes and 2 switches.
Main components
2README
README.mddriver_control
PCB Design for ETD555 group project
This repository includes the design files created for a motor driver circuit. This PCB connected to a LabJack UE-9 and was manipulated via Python code.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5, R6, R8, R9 |
| 4 | D | Diodes_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 3 | TEST_1P | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | J4, J5, J9 |
| 2 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 4N25 | Housings_DIP:DIP-6_W7.62mm | U2, U3 |
| 2 | Tact_SW_NO | Buttons_Switches_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | CONN_01X01 | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | J3 |
| 1 | CONN_01X04 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | J2 |
| 1 | DB37_MALE | Connectors:DB37FD | J1 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm | U5 |
| 1 | LM35DZ | TO_SOT_Packages_THT:TO-92_Inline_Wide | U1 |
The 24 most common of 38 parts.
Questions
How big is the Driver control PCB?
It measures 90.7 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Driver control use?
38 parts, built around the L293D and LM35DZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver control KiCad files?
From the ericbrauer/driver_control repository on GitHub, at the commit this page was made from: the board is KiCad/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver control design in my own project?
Its repository states no licence, so its author keeps all rights: ask ericbrauer before reusing the design.
Similar boards
- 2 layers
Multimeter
MadsRudolph/personal-projects
One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).
62 parts - 2 layers127.1 × 67.1 mm
BlinCAN
metalhead777/blinCAN
A 24 channel LED driver with CAN bus interface and Arduino-style microcontroller.
103 partsCC-BY-SA-4.0 - 2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0