

Snake pcb 3
SnakeBot Project
- Size
- 95 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 38
- Pads
- 82
- Tracks, vias
- 93, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2024
- Updated
- 13 Oct 2026
Overview
Snake pcb 3 is an open-source printed circuit board by ERC-BPGC, from the ERC-BPGC/SnakeBot repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 95 mm with 21 parts on 38 nets, routed with 93 tracks and 5 vias.
Its parts include 9 connectors and 1 IC. It belongs with the robots and motor control boards of this library.
README
README.mdProject SnakeBot
Overview
SnakeBot is a modular, wheelless robot designed by the students of Electronics and Robotics Club. It uses a series of universal joints that provide 2 degrees of freedom (DOF) at each joint. The robot is actuated with the help of strings connected to servos, which rotate each module independently in its plane.
Our project aims to explore the locomotion patterns of snakes and apply them to robotics. Initially, we are focusing on straight-line motion and navigating in the 2D plane, but we aim to implement more advanced movements in the future, such as:
- Serpentine motion
- Sidewinding motion
- Lateral motion (Barell Roll)
The long-term goal of this project is to use the frictional properties of custom designed skin, allowing it to traverse various terrains and surfaces with minimal energy loss, just like biological snakes.

Motion

The fundamental concept behind this is using a sinosoidal wave in the x-y and y-z planes (phase shifted and one wave's amplitude encompassing another wave's) and then fitting the modular snakebot links within the bounds of this wave. This allows it to traverse in any direction based on how the wave evolves.
PCB Designing
To give full modularity to the robot we have developed a modular, chainable PCB based on the RP2040 microcontroller. Each modular PCB consists of a power management circuit, LiPo battery connection, ability to add sensors like an IMU (MPU-6050), and controlling 2 servo motors per each module. We are planning to use serial communication between each module.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4, H5 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3, J8 |
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J4, J5 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H6, H7 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J9 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | ~ | Library:hx-2s-01 | U1 |
More from ERC-BPGC/SnakeBot
1- 2 layers78.5 × 32.8 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
How big is the Snake pcb 3 PCB?
It measures 95 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Snake pcb 3 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Snake pcb 3 KiCad files?
From the ERC-BPGC/SnakeBot repository on GitHub, at the commit this page was made from: the board is snake_pcb_3/snake_pcb_3.kicad_pcb and its schematic OLD_Electronics/Snakebot PCB/Snakebot PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Snake pcb 3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).