Skip to the content
2 layers167.6 × 77.5 mmApple2idiot, the printed circuit board in 3D

A general purpose ESP32 IOT board for the Apple IIe

Size
167.6 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
89
Pads
138
Tracks, vias
221, 2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Jun 2021
Updated
26 Jul 2022

Overview

Apple2idiot is an open-source printed circuit board by equant, from the equant/apple2idiot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 167.6 × 77.5 mm with 4 parts on 89 nets, routed with 221 tracks and 2 vias.

Its parts include 2 ICs, 1 capacitor and 1 connector. It belongs with the ESP32 boards of this library.

README

README.md

apple2idiot card


A general purpose ESP32 Wifi and Bluetooth board for the Apple II family of computers (with expansion slots).

This card is essentially an ESP32 module and a dual-port ram chip. The Apple computer and the ESP communicate via the dual-port ram. That means that the ESP32 doesn't acutally have access to read/write any of the Apple computer's data or address busses. I think that's ok. In fact, I think this card is so simple, and stupid, that lots of fun little things can be done with it, but it's not meant to "get your Apple on the internet".

As a user of the card, you write the software that runs on the ESP32 module, and the software that runs on the Apple computer. In the examples/ folder are examples of how to do simple little things. Software on the apple just peeks/pokes commands and data to the ram chip, and the ESP responds however it's programmed to resppond.

Some of the example programs that have been developed so far

  • Send a message to Slack.
  • Get current weather conditions for a city.
  • Select Wifi AP.
  • Dedicated rot13 string encoder.


Status

The Card

This is actively being developed (as of July 2022). The rev 0.2 boards have arrived, and they work as designed. The gerber files are here in the repo.

The Apple II Software

There are examples written in BASIC and in cc65 in the examples/ directory.

The Card Software/Firmware

The ESP32 can be programmed using whatever you want. For example, you can use the Arduino IDE/C++ or you can use Lua, or Espressif's environment. Example Arduino programs are in the repo under examples.

What could be done with an Apple2Idiot card?

Here are some things I'm interested in making work...

  • Prodos clock driver (NTP -> ESP -> Prodos)
  • Home automation using MQTT
  • Peer-to-peer local area chat/games using ESPNOW or something similar
  • Wikipedia access


Want to help?

There are lots of jobs both little and big and hard and easy for someone looking for a project to join. Take a look at the list above for ideas. Feel free to email me at nathanhendler@gmail.com.

Parts

4
QtyValueFootprintReferences
1CCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC1
1CARD EDGEpub:AppleIIBusJ1
1ESP32-DEVKITC-32DESPDEVKIT:MODULE_ESP32-DEVKITC-32DU2
1IDT7132Package_DIP:DIP-48_W15.24mm_Socket_LongPadsU1

More from equant/apple2idiot

1
  • 2 layers167.6 × 77.5 mmApple2idiot new, the printed circuit board in 3D

    Apple2idiot new

    equant/apple2idiot

    A general purpose ESP32 IOT board for the Apple IIe

    11 parts87GPL-3.0

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Apple2idiot PCB?

It measures 167.6 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Apple2idiot use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Apple2idiot KiCad files?

From the equant/apple2idiot repository on GitHub, at the commit this page was made from: the board is card/apple2idiot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Apple2idiot design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).