

Cansat pcb
Hydro-Vinci project for cansat 2025-2026
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 44
- Pads
- 49
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Nov 2025
- Updated
- 29 Mar 2026
Overview
Cansat pcb is an open-source printed circuit board by enzomorin, from the enzomorin/cansat_project repository on GitHub, published under the MIT licence. It is a 2-layer board with 8 parts on 44 nets.
It belongs with the nRF52 and nRF5x boards of this library.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Buzzer_info | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | Bz |
| 1 | Hall_effect_sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | BME |
| 1 | Jack plug | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | Jack |
| 1 | SPDT_Slide_SMD_6.7x2.6mm | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | Sw |
| 1 | Sen057_pressure_sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Pressure |
| 1 | Servo_motor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Motor |
| 1 | XIAO-nRF52840-Plus-SMD | XIAO_Series_Footprints:XIAO-nRF52840-Plus-SMD | Mcu |
| 1 | telemetry_btn | craby's_library:SW_BUTT-2 | Btn |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
What parts does the Cansat pcb use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cansat pcb KiCad files?
From the enzomorin/cansat_project repository on GitHub, at the commit this page was made from: the board is hardware/src/cansat_pcb.kicad_pcb and its schematic hardware/src/cansat_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cansat pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).