2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers67.8 × 40.8 mm
Servo Controller PCB
Enzo-Coutinho/Servo-Controller-PCB- Size
- 67.8 × 40.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 23
- Pads
- 61
- Tracks, vias
- 66, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Aug 2025
- Updated
- 22 Aug 2025
Overview
Servo Controller PCB is an open-source printed circuit board by Enzo-Coutinho, from the Enzo-Coutinho/Servo-Controller-PCB repository on GitHub. It is a 2-layer board of 67.8 × 40.8 mm with 14 parts on 23 nets, routed with 66 tracks and 0 vias.
Its parts include 7 connectors, 5 resistors, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.
README
README.mdServo-Controller-PCB
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1, J2, J3 |
| 3 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J5, J6, J7 |
| 3 | R025 | Resistor_SMD:R_Shunt_Ohmite_LVK12 | R1, R2, R3 |
| 2 | R10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 1 | C0.1 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J4 |
| 1 | INA3221 | Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U1 |
Questions
How big is the Servo Controller PCB PCB?
It measures 67.8 × 40.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Servo Controller PCB use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Servo Controller PCB KiCad files?
From the Enzo-Coutinho/Servo-Controller-PCB repository on GitHub, at the commit this page was made from: the board is Servo-ControllerPCB.kicad_pcb and its schematic Servo-ControllerPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Servo Controller PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Enzo-Coutinho before reusing the design.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
