Skip to the content
2 layersLedBoard, the printed circuit board in 3D

An open source USB rechargable LED Torch

Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
4
Pads
86
Tracks, vias
23, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
20 Feb 2023
Updated
4 Feb 2025

Overview

LedBoard is an open-source printed circuit board by Envious-Data, from the Envious-Data/EnvOpenTorch repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 21 parts on 4 nets, routed with 23 tracks and 0 vias.

Its parts include 20 diodes and 1 connector.

README

README.md

EnvOpenTorch

A open source rechargable LED Torch

Notes

This design is a bit jank and can certaily do with some improvement, If you feel like doing that then please do so and make a PR.

Generally speaking is to have a decently powerful open source LED torch, Im hoping for 10K lumens and some basic brightness control, anything else is bonnus features but there are some i'd like such as PD charging and being able to act as a battery bank if needed.

Future plans

Im probably going to sell this as a full unit or kit other than the need to supply your own cells, I havent decided on 3S2P or 6S1P but for the time being the charge circuit can handle upto 4S.

Parts

21
QtyValueFootprintReferences
20L1505790500600000L150-5790500600000:L1505790500600000LED1, LED2, LED3, LED4, LED5, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20 +4
17-5530843-77-5530843-7:755308437J4

More from Envious-Data/EnvOpenTorch

3
  • 2 layersEDC Charge Board, the printed circuit board in 3D

    EDC Charge Board

    Envious-Data/EnvOpenTorch

    An open source USB rechargable LED Torch

    87 parts1GPL-3.0
  • 2 layers24.8 × 65 mmChargeBoard, the printed circuit board in 3D

    ChargeBoard

    Envious-Data/EnvOpenTorch

    An open source USB rechargable LED Torch

    49 parts1GPL-3.0
  • 2 layers95.4 × 30 mmIOController, the printed circuit board in 3D

    IOController

    Envious-Data/EnvOpenTorch

    An open source USB rechargable LED Torch

    40 parts1GPL-3.0

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

What parts does the LedBoard use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LedBoard KiCad files?

From the Envious-Data/EnvOpenTorch repository on GitHub, at the commit this page was made from: the board is KiCad files/High Power Variant/LedBoard-HP/LedBoard.kicad_pcb and its schematic KiCad files/EDC Size/EDC MainBoard/BQ25622ERYKR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LedBoard design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).