

ChargeBoard
An open source USB rechargable LED Torch
- Size
- 24.8 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 52
- Pads
- 169
- Tracks, vias
- 273, 42
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2023
- Updated
- 4 Feb 2025
Overview
ChargeBoard is an open-source printed circuit board by Envious-Data, from the Envious-Data/EnvOpenTorch repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 24.8 × 65 mm with 49 parts on 52 nets, routed with 273 tracks and 42 vias.
It is built around the MT3608, BSP89 and AO3401A. Its parts include 22 resistors, 11 capacitors, 5 ICs, 5 transistors and 1 connector.
Main components
3MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersBSP89
SOT-223-40℃~+150℃ 1 N-channel 1.5W 100pF 10pF 2.8Ω@10V 20pF 240V 2V 375mA N-Channel SOT-223 MOSFETs ROHSNexperiaMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdEnvOpenTorch
A open source rechargable LED Torch
Notes
This design is a bit jank and can certaily do with some improvement, If you feel like doing that then please do so and make a PR.
Generally speaking is to have a decently powerful open source LED torch, Im hoping for 10K lumens and some basic brightness control, anything else is bonnus features but there are some i'd like such as PD charging and being able to act as a battery bank if needed.
Future plans
Im probably going to sell this as a full unit or kit other than the need to supply your own cells, I havent decided on 3S2P or 6S1P but for the time being the charge circuit can handle upto 4S.
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF 0402 | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C6, C7, C8, C9, C10 |
| 6 | 1K 0402 | Resistor_SMD:R_0402_1005Metric | R18, R19, R20, R25, R26, R27 |
| 4 | 5.1K 0402 | Resistor_SMD:R_0402_1005Metric | R8, R9, R21, R22 |
| 4 | Conn_01x02 | Connector_Wire:SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm | BAT1, BAT2, BAT3, J101 |
| 3 | 100 0805 | Resistor_SMD:R_0805_2012Metric | R2, R3, R5 |
| 3 | 47 2512 | Resistor_SMD:R_2512_6332Metric | R1, R4, R6 |
| 3 | BSP89 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1, Q2, Q3 |
| 3 | HY2213 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2, U3 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q4, Q5 |
| 1 | 0r 2512 | Resistor_SMD:R_2512_6332Metric | R24 |
| 1 | 10K 0402 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1M 0402 | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 2.2uF 0402 | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 22uF 0402 | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 22uF 0805 25V | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22uH 10A | Inductor_SMD:L_Sunlord_MWSA0605S | L1 |
| 1 | 3K 0402 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 51r 2512 | Resistor_SMD:R_2512_6332Metric | R103 |
| 1 | 62K 0402 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 8254 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U9 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from Envious-Data/EnvOpenTorch
3- 2 layers

- 2 layers95.4 × 30 mm

- 2 layers

Similar boards
- 2 layers100 × 100 mm

Airlock Mainboard
openlab-aux/airlock
This repository contains various soft- and hardware sources for the OpenLab Augsburg Airlock.
79 parts4 - 2 layers105 × 100 mm

Dist
cookiemonsternz/Eurorack-DIST
Every circuit has a gain, tone, and volume control, as well as a switch deciding whether to take input from the previous section or from the input jack.
173 parts1 - 2 layers68 × 52.5 mm

- 2 layers200.2 × 98.8 mm

Potatoesc
gregoryy01/potatoesc
This repo contains greg's attempt to make a bldc controller for Semar Urban, please be nice
82 parts - 2 layers121.3 × 111.8 mm

- 4 layers168.2 × 109.6 mm

- 2 layers84.5 × 30 mm

- 2 layers79.8 × 89.3 mm

Kicad sailframes b1
sailframes/core
Open-source sailboat racing data logger and analytics platform.
72 parts8
Questions
How big is the ChargeBoard PCB?
It measures 24.8 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ChargeBoard use?
49 parts, built around the MT3608, BSP89 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChargeBoard KiCad files?
From the Envious-Data/EnvOpenTorch repository on GitHub, at the commit this page was made from: the board is KiCad files/High Power Variant/ChargerPCB-PD-HP/ChargeBoard.kicad_pcb and its schematic KiCad files/EDC Size/EDC MainBoard/BQ25622ERYKR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChargeBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).