
Panel
Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

A custom PCB implementation of the LTP305 as they are now discontinued.
DIY305 is an open-source printed circuit board by Envious-Data, from the Envious-Data/Env-DIY305 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 9.8 × 18.5 mm with 38 parts on 13 nets, routed with 133 tracks and 35 vias.
Its parts include 36 diodes and 1 connector.
A custom PCB implementation of the LTP305 as they are now discontinued.
the LTP305 is discontinued and I saw a project on hackaday where someone made their own LTP305 using 0201 LEDs on a DIP14 sized PCB so I thought since their pcb files were never released we can re-do it but open source it.
we've made our own but a couple of variations, hand soldering 0201 is hard and using PCBA is expensive for 0201 so there is a 0402 version, its not quite the same led position as the original displays but its functional and close enough as well as being decently cheap.
This is meant as a drop in replacement for the LTP305/TIL305 so we plan for it to work the same except without the diffuser cover and also with other colours.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | LED | LED_SMD:LED_0201_0603Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 1 | Package_DIP:DIP-14_W7.62mm | J4 | |
| 1 | LOGO | LOGO | G*** |

Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 9.8 × 18.5 mm and has 2 copper layers, 1.6 mm thick.
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Envious-Data/Env-DIY305 repository on GitHub, at the commit this page was made from: the board is DIY305-0201/DIY305.kicad_pcb and its schematic DIY305-0201/DIY305.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).