2 layers
Navigatorschema
maddevsio/mad-navigator
Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.
107 parts14
2 layers49.9 × 28 mm
Cc2650 usb
EnJens/ZigbeeBoard1CC2650 Breakout Board
- Size
- 49.9 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 147
- Nets
- 38
- Pads
- 259
- Tracks, vias
- 252, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20160815)
- Created
- 6 Aug 2017
- Updated
- 6 Aug 2017
Overview
Cc2650 usb is an open-source printed circuit board by EnJens, from the EnJens/ZigbeeBoard repository on GitHub. It is a 2-layer board of 49.9 × 28 mm with 147 parts on 38 nets, routed with 252 tracks and 10 vias.
It is built around the CC2650F128RHB, XC6206P332MR and BAT60JFILM, with the FDN340P among its other parts. Its parts include 19 capacitors, 5 connectors, 4 resistors, 3 diodes and 3 inductors.
Main components
4
CC2650F128RHB
VQFN-32-EP(5x5)-40℃~+85℃ -97dBm 1.8V~3.8V 1Mbps 2.4GHz~2.4835GHz 5.9mA 5dBm 6.1mA Power-on reset function、Supports RSSI function VQFN-32-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT60JFILM
SOD-32310V 3A 580mV@1A 6uA@10V Independent SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesFDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
147| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitors_SMD:C_0603 | C1, C2, C4, C7, C8, C12 |
| 3 | 12pF | Capacitors_SMD:C_0603 | C11, C13, C17 |
| 3 | 1uF | Capacitors_SMD:C_0603 | C6, C18, C19 |
| 3 | DNM | Capacitors_SMD:C_0603 | C9, C10, C16 |
| 2 | 1.2pF | Capacitors_SMD:C_0603 | C14, C15 |
| 2 | 10uF | Capacitors_SMD:C_0603 | C3, C5 |
| 2 | 360R | Resistors_SMD:R_0603 | R3, R4 |
| 1 | 0 | Resistors_SMD:R_0603 | R2 |
| 1 | 100k | Resistors_SMD:R_0603 | R1 |
| 1 | 10uH | Capacitors_SMD:C_0603 | L1 |
| 1 | 15nH | Capacitors_SMD:C_0603 | L2 |
| 1 | 24Mhz | Crystals:crystal_FA238-TSX3225 | X1 |
| 1 | 2nH | Capacitors_SMD:C_0603 | L3 |
| 1 | 32.768kHz | crystals_extra:XTAL3215 | Y1 |
| 1 | ANTENNA | jyd:TI_DN007_2.4GHz | ANT1 |
| 1 | BAT60JFILM | Diodes_SMD:SOD-323 | D3 |
| 1 | CC2650F128RHB | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P2 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P1 |
| 1 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P4 |
| 1 | FDN340P | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | PWR_LED | LEDs:LED_0603 | D2 |
| 1 | RST | smallbutton:SmallButton | SW1 |
| 1 | USR_LED | LEDs:LED_0603 | D1 |
| 1 | VBAT | battery_extra:CR2032_SMD | P5 |
| 1 | XC6206P332MR | TO_SOT_Packages_SMD:SOT-23 | U2 |
The 41 most common of 147 parts.
Questions
How big is the Cc2650 usb PCB?
It measures 49.9 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cc2650 usb use?
147 parts, built around the CC2650F128RHB, XC6206P332MR, BAT60JFILM and FDN340P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cc2650 usb KiCad files?
From the EnJens/ZigbeeBoard repository on GitHub, at the commit this page was made from: the board is cc2650_usb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cc2650 usb design in my own project?
Its repository states no licence, so its author keeps all rights: ask EnJens before reusing the design.
Similar boards
- 6 layers29 × 33 mm
MINIREX G4
mathieupommery/MINIREX_G473
The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…
109 parts10 - 2 layers43.4 × 98 mm
Solax Pylontech
70p4z/tparse
A minimalistic C library to parse text in microcontroller without memory allocation.
51 parts6 - 2 layers100 × 100 mm
Reflow
windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.
95 parts4MIT - 6 layers100 × 100 mm
Ai vision
embeddedci-com/pcb-trace-length-analyzer
Two of them, and the difference between them is the point.
370 parts3Apache-2.0 - 4 layers100 × 67 mm
2Phase SynchBuck
Natchpai/LQRx-InterleavedBuck
Digitally Controlled 2-phase Interleaved Buck Converter
306 parts3CERN-OHL-S-2.0 - 4 layers120 × 135 mm
- 2 layers146.1 × 101.6 mm
