
Assignment 1
AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

power supply (schematic and layout for power supply)
Power supply is an open-source printed circuit board by engnourmo, from the engnourmo/power-supply-PCB- repository on GitHub. It is a 2-layer board of 66.3 × 45.5 mm with 21 parts on 11 nets, routed with 88 tracks and 3 vias.
It is built around the MDB10S and TY-311P. Its parts include 3 capacitors, 3 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2, C3 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3 |
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | J2 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D2 |
| 1 | LM317L_SOT-89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LOGO | logos:eagle | G*** |
| 1 | LOGO | logos:Electronics | G*** |
| 1 | LOGO | logos:Electronics2 | G*** |
| 1 | MDB10S | Package_SO:TSSOP-4_4.4x5mm_P4mm | D1 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_CK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | TY-311P | trans_footprint:XFMR_TY-311P | T1 |

AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school



Bala-Kumaran-M/5V-Regulated-Power-Supply-PCB
5V regulated power supply PCB designed using KiCad for stable power delivery to electronic circuits.




Rahul-2-specs/Wearable-Foot-Motion-Energy-Harvester
Wearable piezoelectric energy harvesting system that converts foot motion into electrical energy for low-power wearable and biomedical applications.
It measures 66.3 × 45.5 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the MDB10S and TY-311P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the engnourmo/power-supply-PCB- repository on GitHub, at the commit this page was made from: the board is power_supply.kicad_pcb and its schematic power_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask engnourmo before reusing the design.