2 layers230.5 × 60 mm
2 layers91.3 × 58.7 mm
TasmotaGlow
engineerjoe440/TasmotaGlowESP-01S based controller built with Tasmota firmware in mind for shadow box lights.
- Size
- 91.3 × 58.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 13
- Pads
- 37
- Tracks, vias
- 60, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Nov 2025
- Updated
- 27 Nov 2025
Overview
TasmotaGlow is an open-source printed circuit board by engineerjoe440, from the engineerjoe440/TasmotaGlow repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 91.3 × 58.7 mm with 13 parts on 13 nets, routed with 60 tracks and 0 vias.
It is built around the IRM-10-12. Its parts include 3 connectors, 2 capacitors, 2 resistors, 2 ICs and 2 transistors. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdParts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7k | Resistors:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | BUZ11 | Transistor:TO-220F-3_Vertical | Q1, Q2 |
| 1 | 100nF | Capacitors:C_Disc_D8.0mm_W5.0mm_P5.00mm | C1 |
| 1 | 10uF | Capacitors:C_Disc_D8.0mm_W5.0mm_P5.00mm | C2 |
| 1 | Conn_01x02 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_4-G-5.08_1x04_P5.08mm_Vertical | J2 |
| 1 | ESP-01v090 | TasmotaGenericPCB:ESP-01 | U1 |
| 1 | IRM-10-12 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-10-xx_THT | PS1 |
| 1 | LD1117S33TR_SOT223 | Transistor:TO-220F-3_Vertical | U2 |
| 1 | LOGO | TasmoTree:StanleySolutionsPCB_m | G*** |
| 1 | ResetPinout | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J3 |
Similar boards
- 2 layers100 × 100 mm
Biltong board main
myles-parfeniuk/biltong_board
Sun drying emulation controller for biltong and other dried foodstuffs.
89 parts2GPL-3.0 - 2 layers100 × 100 mm
- 2 layers100 × 100 mm
Gatekeeper PCB
Ingimarsson/gatekeeper
Access control and monitoring system for electric door locks and automatic traffic barriers.
61 parts1MIT - 2 layers175 × 85 mm
Gain box psu pcb
carmisergio/denon-preout-mod
PCB designs and firmware for the Denon AVR-X1300W Pre-out mod
80 parts - 2 layers249 × 180.3 mm
Kicad snapshot step16 rev a layout complete 20260324 150352
jgrano/Nx-PCBA
Install all of these before opening the project:
91 parts - 2 layers91.4 × 94 mm
Simple electronic load
johnysmrz/ElectronicLoad
Yet another simple electronic load with a flair.
48 parts - 2 layers117 × 78 mm
Questions
How big is the TasmotaGlow PCB?
It measures 91.3 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TasmotaGlow use?
13 parts, built around the IRM-10-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TasmotaGlow KiCad files?
From the engineerjoe440/TasmotaGlow repository on GitHub, at the commit this page was made from: the board is TasmotaGlow/TasmotaGlow.kicad_pcb and its schematic TasmotaGlow/TasmotaGlow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TasmotaGlow design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).