Skip to the content
2 layers64 × 30 mmCurrent sensor, the printed circuit board in 3D

Analyses of TIMS stimulation + EEG for Characterization.

Size
64 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
11
Pads
38
Tracks, vias
53, 50
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Mar 2026
Updated
5 May 2026

Overview

Current sensor is an open-source printed circuit board by enemonsieur, from the enemonsieur/TIMS_analyses repository on GitHub. It is a 2-layer board of 64 × 30 mm with 16 parts on 11 nets, routed with 53 tracks and 50 vias.

It is built around the MCP6021-I/SN. Its parts include 6 capacitors, 3 resistors, 2 ICs and 1 connector. It belongs with the sensors and measurement boards of this library.

Main components

1

README

readme.md

TIMS Workspace Entry Point

This repository contains TIMS/TMS-EEG analysis code, experiment notes, and results across multiple experiments. This README is the navigation entry point for the workspace. It tells you where to start and where each kind of work lives. It is not the full scientific record.

Workflow First

Use the repo in this order:

  1. Read the latest memo chain to understand the current decision context.
  2. Check the shared documentation files for memo, script, and figure rules.
  3. Reuse the shared helper modules before adding logic to analysis scripts.
  4. Open the main analyses when you need the scripts behind current conclusions.
  5. Open exploratory analyses only when you are tracing probes, failed paths, or method tests.
  6. Find outputs by experiment at the top level whenever possible.

Latest Memo Chain

Memos in this repo are chained decision documents. Each new memo is expected to link the latest relevant earlier memo in its Latest Shared Information section, so the right reading order is newest to older, not oldest to newest. The current latest visible chain happens to be exp05, but that should not be assumed to stay true as the repo changes.

How To Navigate TIMS

Docs And Decision Records

Helper/Core Files

Shared reusable logic belongs in the core modules, not in new one-off scripts.

If logic is reused across analyses, it should be moved into one of these files instead of being copied into experiment scripts.

Main Analyses

Main analyses are the scripts that support current conclusions or memo-backed outputs.

Exploratory Analyses

Exploratory analyses are probes, method experiments, drafts, and non-decision-driving checks. They are useful for development and evidence, but they should not be treated as the default scientific entry point.

Where Things Live

Raw Data

Protocol Files

  • Top-level .tims and protocol .py files define programmable stimulation protocols used by specific experiments

Main Results

Experiment outputs should be easy to find from the top level by experiment name.

Exploratory Or Legacy Results

  • evidence: probe outputs and comparison artifacts
  • old: archived or legacy material that is no longer in the active result layout

Classification Rules

  • Main analyses: scripts that directly support current conclusions, memo-backed figures, or decision documents
  • Exploratory analyses: probes, method tests, drafts, and diagnostics that help development but are not the default basis for conclusions
  • Results: organize by experiment at the top level where possible, and avoid deep nested result trees unless there is a clear need

Current Layout Issues

The repo now uses top-level experiment result folders more consistently, but there are still cleanup edges to resolve over time. The remaining direction is to keep new outputs experiment-scoped at the top level, avoid loose result files in the repo root, and keep exploratory material clearly separated from main result folders.

Parts

16
QtyValueFootprintReferences
5680nCapacitor_SMD:C_1206_3216MetricC1, C3, C4, C5, C6
210kResistor_SMD:R_1206_3216MetricR2, R3
122Resistor_SMD:R_1206_3216MetricR1
1Conn_01x05_PinConnector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_VerticalJ1
1MCP6021-I/SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1~Capacitor_SMD:C_1206_3216MetricC2
1~TIMS:CSNT651U1

The 12 most common of 16 parts.

More from enemonsieur/TIMS_analyses

9
  • 2 layers177.5 × 82.5 mmMain controller, the printed circuit board in 3D

    Main controller

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    127 parts
  • 2 layers196 × 66 mmRemote input, the printed circuit board in 3D

    Remote input

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    83 parts
  • 2 layers165 × 180 mmDc converters, the printed circuit board in 3D

    Dc converters

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    71 parts
  • 4 layers185 × 90 mmCoil driver, the printed circuit board in 3D

    Coil driver

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    52 parts
  • 2 layers210 × 97 mmCapacitor bank controller, the printed circuit board in 3D

    Capacitor bank controller

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    37 parts
  • 2 layers210 × 97 mmCapacitor bank, the printed circuit board in 3D

    Capacitor bank

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    22 parts
  • 2 layers80 × 30 mmFan distro, the printed circuit board in 3D

    Fan distro

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    14 parts
  • 2 layers46 × 64.5 mmServo driver, the printed circuit board in 3D

    Servo driver

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    13 parts
  • 2 layers26.5 × 26 mmServo distro, the printed circuit board in 3D

    Servo distro

    enemonsieur/TIMS_analyses

    Analyses of TIMS stimulation + EEG for Characterization.

    7 parts

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Current sensor PCB?

It measures 64 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Current sensor use?

16 parts, built around the MCP6021-I/SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Current sensor KiCad files?

From the enemonsieur/TIMS_analyses repository on GitHub, at the commit this page was made from: the board is tims-main/pcb/current_sensor/current_sensor.kicad_pcb and its schematic tims-main/pcb/capacitor_bank/capacitor_bank.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Current sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask enemonsieur before reusing the design.