
Emre HackPad
EmreKadirTiren/HackPad
A little keybord designed by me. Everything from the pcb to the case.

A little keybord designed by me. Everything from the pcb to the case.
V3.0HackPad is an open-source printed circuit board by EmreKadirTiren, from the EmreKadirTiren/HackPad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 34 parts on 30 nets, routed with 96 tracks and 6 vias.
Its parts include 17 switches, 16 diodes and 1 IC. It belongs with the SAM D and SAM boards of this library.
This is my first attempt at making a PCB for my hackpad. I wanted it 100x100 mm but made it to big. While designing this PCB I learned a lot about how KiCad works. This PCB has the following things:
I used a Matrix for de Keyswitsches wich was fun to design. I made this while participating in hackclubs: "You Ship, We Ship"
Hackpad is a limited-time You Ship, We Ship (YSWS) where you can learn how to make your own macropad, and then we ship your design to you! Join #hackpad in the slack to stay up to date and see what other people are working on! Ends October 21st 2024.
Want to join to check: https://hackpad.hackclub.com/
The requirments for this hackpad is the following:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW1 |
| 1 | Seeed Studio XIAO SAMD21 | ScottoKeebs_MCU:Seeed_XIAO_RP2040 | U1 |

EmreKadirTiren/HackPad
A little keybord designed by me. Everything from the pcb to the case.

EmreKadirTiren/HackPad
A little keybord designed by me. Everything from the pcb to the case.


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7


baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EmreKadirTiren/HackPad repository on GitHub, at the commit this page was made from: the board is PCB/V3.0HackPad/V3.0HackPad.kicad_pcb and its schematic PCB/V1.0HackPad/Emre-HackPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EmreKadirTiren before reusing the design.