Skip to the content
2 layers100 × 100 mmV2.0HackPad, the printed circuit board in 3D

A little keybord designed by me. Everything from the pcb to the case.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
30
Pads
140
Tracks, vias
77, 2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Oct 2024
Updated
17 Dec 2024

Overview

V2.0HackPad is an open-source printed circuit board by EmreKadirTiren, from the EmreKadirTiren/HackPad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 33 parts on 30 nets, routed with 77 tracks and 2 vias.

Its parts include 16 diodes, 16 switches and 1 IC. It belongs with the SAM D and SAM boards of this library.

README

PCB/V1.0HackPad/readme.md

V1.0 Emre-HackPad

This is my first attempt at making a PCB for my hackpad. I wanted it 100x100 mm but made it to big. While designing this PCB I learned a lot about how KiCad works. This PCB has the following things:

  • 17x MX Keyswitches
  • 1x RotaryEncoder
  • 1x XIA RP2040

I used a Matrix for de Keyswitsches wich was fun to design. I made this while participating in hackclubs: "You Ship, We Ship"

Hackpad is a limited-time You Ship, We Ship (YSWS) where you can learn how to make your own macropad, and then we ship your design to you! Join #hackpad in the slack to stay up to date and see what other people are working on! Ends October 21st 2024.

Want to join to check: https://hackpad.hackclub.com/

The requirments for this hackpad is the following:

  • The overall design uses 20 or less inputs/switches. This includes rotary encoders!
  • The PCB is under 100mm in either direction, and only uses 2 layers
  • Your design is fully original
  • The macropad uses a through-hole Seeed XIAO RP2040 as its main MCU. No exceptions

Images of the PCB

image image

Parts

33
QtyValueFootprintReferences
16DiodeScottoKeebs_Components:Diode_DO-35D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
16KeyswitchScottoKeebs_MX:MX_PCB_1.00uS1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16
1Seeed Studio XIAO SAMD21ScottoKeebs_MCU:Seeed_XIAO_RP2040U1

More from EmreKadirTiren/HackPad

2
  • 2 layers206.6 × 106.6 mmEmre HackPad, the printed circuit board in 3D

    Emre HackPad

    EmreKadirTiren/HackPad

    A little keybord designed by me. Everything from the pcb to the case.

    36 parts
  • 2 layers100 × 100 mmV3.0HackPad, the printed circuit board in 3D

    V3.0HackPad

    EmreKadirTiren/HackPad

    A little keybord designed by me. Everything from the pcb to the case.

    34 parts

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the V2.0HackPad PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the V2.0HackPad use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the V2.0HackPad KiCad files?

From the EmreKadirTiren/HackPad repository on GitHub, at the commit this page was made from: the board is PCB/V2.0HackPad/V2.0HackPad.kicad_pcb and its schematic PCB/V1.0HackPad/Emre-HackPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the V2.0HackPad design in my own project?

Its repository states no licence, so its author keeps all rights: ask EmreKadirTiren before reusing the design.