Skip to the content
2 layers101 × 61 mmMaincontroller, the printed circuit board in 3D

MK vom Megabot

Size
101 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
90
Pads
172
Tracks, vias
252, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Jun 2018
Updated
5 Dec 2018

Overview

Maincontroller is an open-source printed circuit board by empirephoenix, from the empirephoenix/MegaBot-MK3 repository on GitHub. It is a 2-layer board of 101 × 61 mm with 31 parts on 90 nets, routed with 252 tracks and 0 vias.

Its parts include 18 resistors and 5 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

MegaBot-MK3

MK vom Megabot

Parts

31
QtyValueFootprintReferences
4MCP4725Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalHinten_links1, Hinten_rechts1, Vorne_links1, Vorne_rechts1
4R30kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR7, R8, R9, R10
4R380Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2, R3, R4
3R4k7Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR16, R17, R18
2R2k7Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR12, R13
2R2k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR11, R14
1Analog_MotorConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1Arduino_Mega2560_ShieldArduino:Arduino_Mega2560_ShieldXA1
1Conn_01x02Connector_JST:JST_EH_B02B-EH-A_1x02_P2.50mm_VerticalBus1
1Conn_01x05_FemaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Verticalrelays1
1Hall_InConnector_JST:JST_EH_B04B-EH-A_1x04_P2.50mm_VerticalJ6
1LEDConnector_JST:JST_EH_B04B-EH-A_1x04_P2.50mm_VerticalJ1
1OneWireConnector_JST:JST_EH_B04B-EH-A_1x04_P2.50mm_VerticalJ5
1R215Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR5
1R4K7Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR6
1R4k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR15
1ReceiverConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1SW_PushButton_Switch_THT:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mmReset1

More from empirephoenix/MegaBot-MK3

1

Similar boards

  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0
  • 2 layers103 × 55 mmTd neck-294, the printed circuit board in 3D

    Td neck-294

    tdaede/td-crt

    tubes

    31 parts373

Questions

How big is the Maincontroller PCB?

It measures 101 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Maincontroller use?

31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Maincontroller KiCad files?

From the empirephoenix/MegaBot-MK3 repository on GitHub, at the commit this page was made from: the board is MainController/maincontroller/maincontroller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Maincontroller design in my own project?

Its repository states no licence, so its author keeps all rights: ask empirephoenix before reusing the design.