
Bus selector
emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

Hobby project of building an ALU/CPU/computer from basic components
1-bit memory is an open-source printed circuit board by emlun, from the emlun/octobot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 17 parts on 9 nets, routed with 83 tracks and 7 vias.
Its parts include 9 transistors, 5 resistors and 3 connectors.
This is a hobby project of building an ALU, CPU, computer, or whatever it ends up as before I tire of it, from basic components. Think of it as a learning and art project more than anything practically useful.
Inspirations include:
Special thanks also to the Boldport Club community for providing newbie help as I try to figure these things out!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 2N7000 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 5 | R | Resistors_SMD:R_0805 | R1, R2, R3, R4, R5 |
| 1 | J1-1_bit_bus | emlun:J1-1_bit_bus | J3 |
| 1 | J2-2_bit_bus | emlun:J2-2_pole_connector | J1 |
| 1 | J2-2_pole_connector | emlun:J2-2_pole_connector | J2 |

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components

emlun/octobot
Hobby project of building an ALU/CPU/computer from basic components



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the emlun/octobot repository on GitHub, at the commit this page was made from: the board is memory/1-bit-memory/1-bit-memory.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).