Skip to the content
2 layers38.1 × 21.3 mmUda1345 pmod, the printed circuit board in 3D

Uda1345 pmod

emeb/i2s_codecs4

Testing I2S codecs

Size
38.1 × 21.3 mm
Copper layers
2
Thickness
1.56 mm
Parts
21
Nets
21
Pads
86
Tracks, vias
220, 36
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Jun 2025
Updated
9 Jun 2025

Overview

Uda1345 pmod is an open-source printed circuit board by emeb, from the emeb/i2s_codecs repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.1 × 21.3 mm with 21 parts on 21 nets, routed with 220 tracks and 36 vias.

Its parts include 9 capacitors, 2 resistors, 2 connectors and 1 IC.

README

rp2040_i2s_tester/README.md

RP2040_I2S_Tester

I2S Signal Generator for testing CODECs

Abstract

This directory contains a KiCAD design for an RP2040-based I2S signal generator that can drive the CODEC PMODs described elsewhere in this repository.

Firmware

The RP2040 firmware for this design can be found elsewhere in this repository.

Parts

21
QtyValueFootprintReferences
64.7ufCapacitor_SMD:C_0402_1005MetricC2, C4, C5, C10, C12, C14
30.1ufCapacitor_SMD:C_0402_1005MetricC1, C3, C6
110Resistor_SMD:R_0603_1608MetricR2
147Resistor_SMD:R_0603_1608MetricR1
1AudioConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1CONN_02X06Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1
1MODEJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1MP1Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1MP2Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1MP3Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP4
1MP4Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP5
1MP5Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP6
1UDA1345Package_SO:SSOP-28_5.3x10.2mm_P0.65mmU1
1Val**EMEB:avatar_smallRef**

More from emeb/i2s_codecs

4
  • 2 layers51.3 × 16.3 mmRp2040 i2s tester, the printed circuit board in 3D

    Rp2040 i2s tester

    emeb/i2s_codecs

    Testing I2S codecs

    43 parts4MIT
  • 2 layers38.1 × 21.3 mmNau8822 pmod, the printed circuit board in 3D

    Nau8822 pmod

    emeb/i2s_codecs

    Testing I2S codecs

    14 parts4MIT
  • 2 layers31 × 21.3 mmSgtl5000 pmod, the printed circuit board in 3D

    Sgtl5000 pmod

    emeb/i2s_codecs

    Testing I2S codecs

    14 parts4MIT

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Uda1345 pmod PCB?

It measures 38.1 × 21.3 mm and has 2 copper layers, 1.56 mm thick.

What parts does the Uda1345 pmod use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Uda1345 pmod KiCad files?

From the emeb/i2s_codecs repository on GitHub, at the commit this page was made from: the board is codec_pmods/uda1345_pmod/uda1345_pmod.kicad_pcb and its schematic codec_pmods/nau8822_pmod/nau8822_pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Uda1345 pmod design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).