Skip to the content
2 layers48.2 × 34.7 mmBatt pcb front, the printed circuit board in 3D

Submersible field camera and sensor instrument

Size
48.2 × 34.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
3
Pads
17
Tracks, vias
12, 29
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Sep 2026
Updated
14 Sep 2026

Overview

Batt pcb front is an open-source printed circuit board by EmbryoPhenomics, from the EmbryoPhenomics/FieldCam repository on GitHub. It is a 2-layer board of 48.2 × 34.7 mm with 9 parts on 3 nets, routed with 12 tracks and 29 vias.

README

README.md

FieldCam

A submersible field camera and sensor instrument

FieldCam is a versatile, waterproof imaging and sensing instrument, powered by consumer AA batteries and capable of long term timelapse imaging out in the field.

image

Some of the key specifications of this instrument are as follows:

ComponentDescription
Waterproof enclosureAcrylic tube with aluminium end caps rated to 130m depth
Battery17.1 Ah AA battery pack (~24 hrs continuous video recording). Capacity for additional 22.8 Ah AA battery pack (~30 hrs). Low power mode is > 10 years with continuous system and sensor monitoring (5 second resolution)
ProcessorsSTM32 L4 microcontroller for system control and low power standby. Raspberry Pi Zero 2W for video and image capture, 32gb and 1Tb SD cards for storage respectively
Camera sensorCMOS 12-megapixel (Sony IMX708)
Video resolution1080p50fps maximum. Resolution and framerate can be configured using built-in app
FocusPhase Detection Autofocus (PDAF) or manual adjustable focus. Range 5cm to > 2m.
Camera parametersExposure (Auto or manual), analogue gain and auto-white balance modes can all be configured via Web App
LightingBuilt-in adjustable LEDs (x2) with up to 170 lm each
SensorsTemperature and light built-in. Pressure, salinity, pH and O2 available with additional sensor pack
ConfigurationSetup via Web App using smartphone or laptop, connected to the instrument’s wifi hotspot. Web App enables live streaming and config of camera sensor, viewing of system status and programming of experimental schedule. All data, including video and sensor logs can be downloaded via network file sharing when in setup mode
Dimensions70 mm x 195 mm

Parts

9
QtyValueFootprintReferences
6Conn_01x01_PinTestPoint:TestPoint_Pad_D4.0mmJ2, J3, J4, J5, J6, J7
1Battery_CellBattery:BatteryHolder_Keystone_3000_1x12mmBT1
1Conn_01x02_SocketConnector_JST:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_VerticalJ1
1Conn_01x02_SocketConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ8

More from EmbryoPhenomics/FieldCam

12
  • 4 layers39 × 119.5 mmFieldcam, the printed circuit board in 3D

    Fieldcam

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    136 parts
  • 4 layers39 × 119.5 mmFieldcam, the printed circuit board in 3D

    Fieldcam

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    135 parts
  • 2 layers38.5 × 31.8 mmBatt switch evm, the printed circuit board in 3D

    Batt switch evm

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    34 parts
  • 2 layers19.3 × 46.1 mmBatt pcb rear, the printed circuit board in 3D

    Batt pcb rear

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    32 parts
  • 2 layers47.9 × 34.7 mmBatt pcb front, the printed circuit board in 3D

    Batt pcb front

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    15 parts
  • 2 layers20.4 × 47.9 mmBatt pcb rear, the printed circuit board in 3D

    Batt pcb rear

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    15 parts
  • 2 layers20.4 × 47.9 mmBatt pcb rear, the printed circuit board in 3D

    Batt pcb rear

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    15 parts
  • 2 layers20.4 × 47.9 mmBatt pcb rear, the printed circuit board in 3D

    Batt pcb rear

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    12 parts
  • 2 layers48.2 × 34.7 mmBatt pcb front, the printed circuit board in 3D

    Batt pcb front

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    11 parts
  • 2 layers35.1 × 17.6 mmLed pcb, the printed circuit board in 3D

    Led pcb

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    11 parts
  • 2 layers35 × 17.6 mmLed pcb, the printed circuit board in 3D

    Led pcb

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    6 parts
  • 2 layers10 × 23.2 mmTemperature fin, the printed circuit board in 3D

    Temperature fin

    EmbryoPhenomics/FieldCam

    Submersible field camera and sensor instrument

    6 parts

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Batt pcb front PCB?

It measures 48.2 × 34.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Batt pcb front use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Batt pcb front KiCad files?

From the EmbryoPhenomics/FieldCam repository on GitHub, at the commit this page was made from: the board is electronics/batt_pcb_front/batt_pcb_front-backups/batt_pcb_front-2025-10-09_140730/batt_pcb_front.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Batt pcb front design in my own project?

Its repository states no licence, so its author keeps all rights: ask EmbryoPhenomics before reusing the design.