Skip to the content
2 layers72 × 57.5 mmController, the printed circuit board in 3D

MAKE robotwars

Size
72 × 57.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
36
Pads
55
Tracks, vias
40, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
16 Sep 2023
Updated
3 Nov 2023

Overview

Controller is an open-source printed circuit board by Elp03, from the Elp03/MakeRobotwars2023 repository on GitHub. It is a 2-layer board of 72 × 57.5 mm with 11 parts on 36 nets, routed with 40 tracks and 0 vias.

Its parts include 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.

README

README.md

MakeRobotwars2023

MAKE robotwars

Pins that work on an esp 32 D32 - PMW port D33 - PMW port D35 - not a PMW port but acctualy works with analogread D34 - works not used for PMW or analog read D39 - Named VN(why?) perfect for boleans D36 - Named VP(why? i dont know) perfect for boleans Pins that does not wort with ESP_NOW D25 D26 not work, dont thing adc2 works with esp32

Controller Joystick x: D34 y: D35 Buttons Start/stopp robot: D39 Start/stopp wepon: D36 Potmeter pot: D33

Parts

11
QtyValueFootprintReferences
3R_SmallResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalResistor1, Resistor2, Resistor4
1ESP32_DevKit_V1_DOITesp32:esp32_devkit_v1_doitESPcontroller1
1JoystickConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU1
1RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalR1
1R_PotentiometerConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalWeponspeed1
1SW_MEC_5EButton_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2Start/stop_wepon1
1SW_MEC_5EButton_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH3xxxxxxV2Stop/start_robot1

The 9 most common of 11 parts.

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Controller PCB?

It measures 72 × 57.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the Elp03/MakeRobotwars2023 repository on GitHub, at the commit this page was made from: the board is controller/controller.kicad_pcb and its schematic controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Elp03 before reusing the design.