2 layers58 × 32 mm
2 layers21.6 × 15.6 mm
Esp8266-1 bme280
elnappo/PCBCollection of some PCBs
- Size
- 21.6 × 15.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 5
- Pads
- 44
- Tracks, vias
- 93, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jan 2019
- Updated
- 15 May 2019
Overview
Esp8266-1 bme280 is an open-source printed circuit board by elnappo, from the elnappo/PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.6 × 15.6 mm with 12 parts on 5 nets, routed with 93 tracks and 0 vias.
It is built around the BME280 and AMS1117-3.3. Its parts include 4 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the ESP8266 boards of this library.
Main components
2
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPCB
My collection of custom made PCBs.
ESP8266-1 BME280 Board
Packet Radio
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C3 |
| 2 | 100 nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x04_P2.00mm_Vertical | J2 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
The 11 most common of 12 parts.
Questions
How big is the Esp8266-1 bme280 PCB?
It measures 21.6 × 15.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp8266-1 bme280 use?
12 parts, built around the BME280 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266-1 bme280 KiCad files?
From the elnappo/PCB repository on GitHub, at the commit this page was made from: the board is ESP8266-1 BME280/esp8266-1_bme280.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266-1 bme280 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from elnappo/PCB
1Similar boards
- 2 layers95 × 67 mm
1e3c0a280b22034a487261aa2451d276e8631e8a0f44761d6a49a571b81d7071
autonomous-ai/autonomous-circuit
Chat with AI, get a verified PCB and a fab packet you can order.
51 parts14MIT - 2 layers100 × 80 mm
- 2 layers66 × 143.3 mm
WeatherV3-kernelcon2026
ZonkSec/kernelcon-2026-badge
source code for kernelcon 2026 off grid badge
87 parts4 - 2 layers100 × 60 mm
- 2 layers24 × 57.8 mm
Weather station
mec-kon/weather_station
A simple weather station hardware (pcb files) for recording temperature, humidity, pressure and airquality.
73 parts3GPL-3.0 - 2 layers341.8 × 158.5 mm
Ws2812-clock
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
533 parts2GPL-3.0 - 4 layers74.4 × 64.2 mm
Iot device pcb
ODARI-CHARLES1/iot_device_pcb
Hardware design for a air conditioner pcb design using Kicad software. This is for learning purpose only not manufacturable.
76 parts2 - 6 layers133.1 × 133.1 mm
AERIS H743-PCB
7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.
114 parts1