
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

STM32L010 Breakout Board
Stm32l010-breakout is an open-source printed circuit board by elevendroids, from the elevendroids/stm32l010-breakout repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 24 × 50 mm with 30 parts on 45 nets, routed with 302 tracks and 52 vias.
It is built around the BC847CDW1. Its parts include 11 resistors, 8 capacitors, 3 connectors, 2 diodes and 1 IC. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.
Small MCU board designed primarly for the STM32L010K8T6 ARM Cortex-M0+ microcontroller: Datasheet
Can also be used with other pin-compatible STM32 MCUs in LQFP-32 package:
Designed in KiCad 5.1.6


Schematic: PDF
License: CC BY-SA 4.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0R | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C8 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | 12p* | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | BC847CDW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | Bead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LED0 | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LED1 | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Left | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | Right | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | STM32L010K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
The 29 most common of 30 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 24 × 50 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the BC847CDW1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the elevendroids/stm32l010-breakout repository on GitHub, at the commit this page was made from: the board is stm32l010-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).