

Auxilary Tree
A soldering kit of a "3D" Christmas Tree
- Size
- 50 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 15
- Pads
- 36
- Tracks, vias
- 67, 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190905)
- Created
- 19 Dec 2019
- Updated
- 16 Apr 2020
Overview
Auxilary Tree is an open-source printed circuit board by Electro707, from the Electro707/2019_3D_Tree_PCB_Kit repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 75 mm with 15 parts on 15 nets, routed with 67 tracks and 1 via.
Its parts include 7 resistors, 7 diodes and 1 connector.
README
README.md2019_3D_Tree_PCB_Kit
A soldering kit of a "3D" Christmas Tree
This repository is archived, as it's a one-time design. Now files are hosted on Google Drive.
Link to website, in which the Google Drive link can be found: Link
I may create a new general reposity for the kit that will be updated as time goes on (there also won't be any of the University of New Haven logos on that one).
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED_ALT | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1, D2, D3, D4, D5, D6, D7 |
| 7 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J1 |
More from Electro707/2019_3D_Tree_PCB_Kit
1- 2 layers100 × 99.8 mm

Similar boards
- 2 layers19 × 76 mm

Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm

Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm

BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm

Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm

L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm

EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm

Questions
How big is the Auxilary Tree PCB?
It measures 50 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Auxilary Tree use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Auxilary Tree KiCad files?
From the Electro707/2019_3D_Tree_PCB_Kit repository on GitHub, at the commit this page was made from: the board is PCB - KiCad/Auxilary Tree/PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Auxilary Tree design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).