2 layers100 × 60 mm
2 layers99.9 × 49.8 mm
Touch LED controller
elect-gombe/touch-LED-controllerタッチ方式のLEDコントローラを作りたい。
- Size
- 99.9 × 49.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 39
- Pads
- 225
- Tracks, vias
- 920, 175
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Jun 2018
- Updated
- 28 Jun 2018
Overview
Touch LED controller is an open-source printed circuit board by elect-gombe, from the elect-gombe/touch-LED-controller repository on GitHub. It is a 2-layer board of 99.9 × 49.8 mm with 91 parts on 39 nets, routed with 920 tracks and 175 vias.
It is built around the PIC16F1933-I/SS, TLP152 and NJU7223F18#. Its parts include 20 diodes, 19 capacitors, 11 resistors, 6 ICs and 3 transistors. It belongs with the PIC boards of this library.
Main components
3
PIC16F1933-I/SS
SSOP-28-40℃~+85℃ 1.8V~5.5V 10bit 25 256Byte 256Byte 32MHz 7KB 8 Bit Built-in FLASH PIC SSOP-28-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TLP152
SO-6Gate Drive OptocouplerKTP
NJU7223F18#
TO-220F-40℃~+85℃@(Ta) 1 1.8V 14V 30uA 400mV@(150mA) 500mA 57dB@(120Hz) 65uV Fixed Over Current Protection Positive TO-220F Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNisshinbo Micro Devices Inc.Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | LED | mTouch:LED_0603_1608Metric_Pad_ReverseMounted | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 10 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 8 | Mounting_Hole_PAD | TestPoint:TestPoint_Pad_D1.0mm | MK1, MK2, MK3, MK4, MK5, MK6, MK7, MK8 |
| 5 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.99x1.00mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad0.99x1.00mm_HandSolder | C1, C2, C3, C4 |
| 3 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.99x1.00mm_HandSolder | R9, R10, R11 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.99x1.00mm_HandSolder | R6, R7, R8 |
| 3 | GND | mTouch:TestPoint_Pad_D1.5mm | TP3, TP3, TP3 |
| 3 | SKI03036 | Package_TO_SOT_SMD:TO-263-2 | Q1, Q2, Q3 |
| 3 | TLP152 | Package_SO:MFSOP6-5_4.4x3.6mm_P1.27mm | U2, U3, U4 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C15, C16 |
| 2 | 100u 12.5V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_Hand | C18, C19 |
| 2 | Vcc | mTouch:TestPoint_Pad_D1.5mm | TP2, TP2 |
| 1 | 10uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 47u | Capacitor_SMD:CP_Elec_6.3x4.5 | C17 |
| 1 | 5V | mTouch:TestPoint_Pad_D1.5mm | TP2 |
| 1 | CLK | mTouch:TestPoint_Pad_D1.5mm | TP5 |
| 1 | CdS | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | DAT | mTouch:TestPoint_Pad_D1.5mm | TP4 |
| 1 | DebugTx | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | NJU7223 | Package_TO_SOT_SMD:TO-252-2 | U6 |
| 1 | PIC16F1933 | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U1 |
| 1 | Regulator | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | touchSlider5 | mTouch:mTouch3-1 | U5 |
| 1 | ~MCLR | mTouch:TestPoint_Pad_D1.5mm | TP1 |
The 80 most common of 91 parts.
Questions
How big is the Touch LED controller PCB?
It measures 99.9 × 49.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Touch LED controller use?
91 parts, built around the PIC16F1933-I/SS, TLP152 and NJU7223F18#. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Touch LED controller KiCad files?
From the elect-gombe/touch-LED-controller repository on GitHub, at the commit this page was made from: the board is test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Touch LED controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask elect-gombe before reusing the design.
Similar boards
- 2 layers100 × 20 mm
- 2 layers99.1 × 50.2 mm
Altair Remote Emergency Stop V1
Altairu/Altair_Remote_Emergency_Stop_V1
Altair_Remote_Emergency_Stop_V1
37 parts - 4 layers100 × 68.4 mm
- 2 layers120 × 130 mm
- 2 layers95 × 80 mm
- 2 layers263.3 × 128 mm
KIKAD
MUBARIS-KT/DC-DC_CONVERTER
This project provides the complete design and code for a DC to DC converter that steps up 12V DC to 300V DC. The project is a comprehensive solution in power electronics, including PCB design, STM32 code for PWM…
133 parts - 2 layers100 × 54.6 mm
