Skip to the content
2 layers220 × 103 mmStandalone keypad, the printed circuit board in 3D

This is my project for third week Half Life, a keyboard powered with a ESP32 connected to a power bank that uses a speaker to play 3 diferent sounds (acoustic, electric and organ). That's what makes it standalone!

Size
220 × 103 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
35
Pads
81
Tracks, vias
161, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Oct 2026
Updated
25 Oct 2026

Overview

Standalone keypad is an open-source printed circuit board by ElDragonMC, from the ElDragonMC/Standalone-keyboard repository on GitHub. It is a 2-layer board of 220 × 103 mm with 11 parts on 35 nets, routed with 161 tracks and 0 vias.

Its parts include 3 switches and 1 IC. It belongs with the keyboards and input and audio and music boards and the ESP32 boards of this library.

README

README.md

Standalone keyboard

This is my project for third week Half Life, a keyboard powered with a ESP32 connected to a power bank that uses a speaker to play 3 diferent sounds (acoustic, electric and organ). That's what makes it standalone!

I enjoyed very much making this project (specialy the PCB). For me, the most difficult part, was making the code so it can properly function.

PCB Schematic:

Schematic_standalone_keyboard Captura de pantalla 2026-10-25 212012

Some PCB Renders:

Front: Keypad_Front

Back: Keypad_Back

Bill Of Materials

ItemQtySupplierCost/itemTotal Costlink
PCB1JLCPCB$6.05$6.05JLCPCB
Speaker1Aliexpress ES$2.04$2.04Aliexpress ES
Amplifier1Aliexpress ES$2.23$2.23Aliexpress ES
Rotary Encoder1Aliexpress ES$1.42$1.42Aliexpress ES
Waveshare ESP32-S3-Zero1Aliexpress ES$11.42$11.42Aliexpress ES
MPR1211Aliexpress ES$3.04$3.04Aliexpress ES
Estimated total shipping1——$0.00—
Total Cost1——$26.20—

Desing Process

I designed the PCB with KiCad (the only PCB design software i know how to use) following some parts from the starter guide to have a base idea. I wanted to make a case for it but i think it will look cooler to have it raw. A sleek black PCB will look very cool.

How To Assemble

  1. First grab the PCB and verify if it's clean and well-made.
  2. Grab the ESP32, the MPR121 and the Amplifier and solder the pin headers. For the ESP32 it's two 9 pin header, for the MPR121, it's a 6 pin header and a 12 pin header and finaly for the amplifier it's two one pin header and a 7 pin header.
  3. Weld the ESP32, the MPR121, the Amplifier, the JST connector for the speaker, the three switches and the rotary encoder to the PCB
  4. There's two parts on the pack of the JST connector. One it's welded on the PCB. The other you have to solder it to the who cables of the speaker. MAKE SURE THE RED WIRE GOES TO THE UPPER PART OF THE JST CONNECTOR
  5. Hot glue the speaker to the PCB

How to upload the firmware

  1. Open the Arduino IDE

  2. Open File → Preferences. In Additional Boards Manager URLs, add:

    text
    https://espressif.github.io/arduino-esp32/package_esp32_index.json
  3. Open Tools → Board → Boards Manager, search for esp32, and install esp32 by Espressif Systems.

  4. Under Tools → Board → esp32, select Waveshare ESP32-S3-Zero.

  5. Open Sketch → Include Library → Manage Libraries. Install this library:

    • Adafruit MPR121

    If Arduino asks to install dependencies, choose Install All.

  6. Connect the ESP32 to the computer.

  7. Open keyboard_code.ino and click Arduino's arrow-shaped Upload button to upload the firmware to the board.

Controls

Control (from left to right)What it does
First buttonPlays with the Acoustic sound
Second buttonPlays with the Electric sound
Third buttonPlays with the Organ sound
Rotary encoderControl the volume

Parts

11
QtyValueFootprintReferences
1Acoustic soundButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1
1Capacitive keysfootprints:KeyboardESP32
1ESP32-S3-ZEROfootprints:MODULE_ESP32-S3-ZEROU1
1Electric soundButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW2
1LOGOPCB Cosmetics:Estelada_40mmG***
1LOGOPCB Cosmetics:Orpheus flag top.kicad_symG***
1MPR121QR2 Capacitive Sensorfootprints:MPR121Capacitive Sensor
1Organ soundButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW3
1SpeakerConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalSpeaker
1Volume KnobRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHolesRotary Encoder
1adafruit-MAX98357 Amplifierfootprints:adafruit-MAX98357Amplifier

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Standalone keypad PCB?

It measures 220 × 103 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Standalone keypad use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Standalone keypad KiCad files?

From the ElDragonMC/Standalone-keyboard repository on GitHub, at the commit this page was made from: the board is PCB KiCad Files/standalone-keypad.kicad_pcb and its schematic PCB KiCad Files/standalone-keypad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Standalone keypad design in my own project?

Its repository states no licence, so its author keeps all rights: ask ElDragonMC before reusing the design.