2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0
2 layers11 × 19.1 mm
Front board adapter PCB
el-bart/Voron_stuffmy Voron 2.4 cfg, mods, notes, links and references
- Size
- 11 × 19.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 8
- Pads
- 17
- Tracks, vias
- 45, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jul 2024
- Updated
- 22 Oct 2026
Overview
Front board adapter PCB is an open-source printed circuit board by el-bart, from the el-bart/Voron_stuff repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 11 × 19.1 mm with 4 parts on 8 nets, routed with 45 tracks and 2 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdVoron stuff
my notes / mods / links for Voron 2.4 rev.2 350mm. based on LDO kit (rev. C).
docs
installation
- klipper firmware installation
- STM32F446
- 12MHz
- USB interface
- 32KiB bootloader offset
- Voron startup checks
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | HE | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J2 |
| 1 | LED | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J3 |
| 1 | PCB_conn | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | PCF | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J4 |
Questions
How big is the Front board adapter PCB PCB?
It measures 11 × 19.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Front board adapter PCB use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Front board adapter PCB KiCad files?
From the el-bart/Voron_stuff repository on GitHub, at the commit this page was made from: the board is mods/front_board_adapter_PCB/front_board_adapter_PCB.kicad_pcb and its schematic mods/front_board_adapter_PCB/front_board_adapter_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Front board adapter PCB design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0