2 layers
2 layers43.2 × 58.4 mm
Rocket
eirbot/eirbot_leagueRocket League inspired robots
- Size
- 43.2 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 21
- Pads
- 48
- Tracks, vias
- 39, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jan 2019
- Updated
- 14 Sep 2019
Overview
Rocket is an open-source printed circuit board by eirbot, from the eirbot/eirbot_league repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43.2 × 58.4 mm with 14 parts on 21 nets, routed with 39 tracks and 11 vias.
It is built around the ATTINY84A-PU. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdeirbot_league
Rocket League inspired robots
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1pin | Connectors:1pin | , , , |
| 2 | 10 kR | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | POT_left1, POT_right1 |
| 2 | Conn_01x03_Female | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RF, Switch_input |
| 1 | 10 nF | Capacitors_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C_dec |
| 1 | ATtiny84A-PU | Housings_DIP:DIP-14_W7.62mm | ATtiny84A |
| 1 | Conn_01x02_Female | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | LED |
| 1 | Conn_01x02_Male | Connectors_Phoenix:PhoenixContact_MC-G_02x3.81mm_Angled | Battery |
| 1 | Conn_02x05_Odd_Even | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | ISP |
| 1 | R_led | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_led |
Questions
How big is the Rocket PCB?
It measures 43.2 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rocket use?
14 parts, built around the ATTINY84A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rocket KiCad files?
From the eirbot/eirbot_league repository on GitHub, at the commit this page was made from: the board is controller/pcb/rocket.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rocket design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from eirbot/eirbot_league
1Similar boards
- 2 layers57 × 57 mm
Quiet orbit qo r1-usb c four light ambient lamp board
copperheadhq/copperhead-quiet-orbit
USB-C four-light ambient lamp, 57 mm, ATtiny84A hardware PWM. Designed with copperhead. Never built: do not order expecting it to work.
27 parts3 - 2 layers96.5 × 25.4 mm
- 2 layers94 × 63.8 mm
TinySensorv1
arcadien/tinySensor
Firmware and generic board for low-power environment sensors
45 parts2MIT - 2 layers55.2 × 40.6 mm
- 2 layers35 × 28 mm
Volvo240pcb
pddenhar/Volvo_240_Info_Display
OLED dashboard module for the Volvo 240 displaying battery voltage, speed, and RPM.
18 parts2 - 2 layers90 × 40 mm
Plate
BryceVandegrift/hot-plate
A DIY PCB hot plate that uses through hole components
30 parts1CERN-OHL-W-2.0 - 2 layers92 × 45 mm
L6 - P2
AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school
49 parts - 2 layers46 × 66 mm
Door sensor schaltplan
Brawn1/ATTiny-Door-Sensor
Door Sensor Battery based with Attiny84 and HC-12 Sender
19 parts