Skip to the content
2 layers11.5 × 7.5 mmUsb bridge, the printed circuit board in 3D

G-code controller for Siemens S (Schultz) feeders

Size
11.5 × 7.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
5
Pads
11
Tracks, vias
13, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
28 Dec 2025
Updated
28 Dec 2025

Overview

Usb bridge is an open-source printed circuit board by eilbek-research, from the eilbek-research/er-schultzcontroller repository on GitHub. It is a 2-layer board of 11.5 × 7.5 mm with 2 parts on 5 nets, routed with 13 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

SchultzController

G-code controller for Siemens S (Schultz) feeders. This controller is mainly designed to be integrated into OpenPnP, but since it is G-Code based through USB interface, it will fit just about any pick and place project.

This firmware was created as part of Eilbek Research's open source electronics manufacturing project.

We are working on setting up our own electronics production line in Hamburg and open-sourcing what we learn in the process.

If you want to learn about our project, you can find us talking about it:

This guide/project is still quite early as we fund our work through engineering freelance and consulting projects.

If you came here from congress: This repository contains electronics design files, firmware code (arduino-based), and information about our efforts reverse-engineering Siemens S series feeders.

If you own some of these feeders and you need help or information, don't hesitate to contact us at eilbek-research.de/contact

Arduino based controller in the hardware section.

The controller board distributes power to the feeders and provides the communication interface for 20 feeder units (40 lanes of components). There are two versions of the controller board. The KiCad files are in this folder.

  • The 4 pin version has 20 individual 4 pin connectors. One for each feeder unit.
  • the 96 pin version has one 96 pin DIN connector compatible with the connector on the Siemens Communication Unit connector board. This board is Siemens 1710470-Y1032-C1-01-86 and is inside of 00316265S05.

Arduino code in the firmware section.

The board uses a Arduino Nano Every. This is a low cost arduino which can easily be soldered to the control board. Edit the config.h file in the arduino sketch to select the type of board you are using, then upload the sketch to the board.

Previous work

This repository is a fork of https://github.com/bilsef/SchultzController, the original creator of the SchultzController.

Our work adds onto this by providing updated hardware, and support for Gen 2 feeders, as well as all error codes that will enable proper error-handling and feeder usage flow in OpenPnP.

Parts

2
QtyValueFootprintReferences
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ2
1USB_B_Microawtech:Aliexpress_USB-Micro-B-VerticalJ1

More from eilbek-research/er-schultzcontroller

2
  • 2 layers83 × 83 mmSiplace feeder controller, the printed circuit board in 3D

    Siplace feeder controller

    eilbek-research/er-schultzcontroller

    G-code controller for Siemens S (Schultz) feeders

    171 parts2

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Usb bridge PCB?

It measures 11.5 × 7.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usb bridge use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb bridge KiCad files?

From the eilbek-research/er-schultzcontroller repository on GitHub, at the commit this page was made from: the board is Hardware/usb-bridge/usb-bridge.kicad_pcb and its schematic Hardware/siplace_feeder_controller_96pin/file5E2A746D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb bridge design in my own project?

Its repository states no licence, so its author keeps all rights: ask eilbek-research before reusing the design.