

Common Slot Mini v1
Code
- Size
- 86.3 × 42.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 16
- Pads
- 130
- Tracks, vias
- 119, 4
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2011
- Updated
- 24 Aug 2026
Overview
Common Slot Mini v1 is an open-source printed circuit board by Ehryk, from the Ehryk/ehryk.github.com repository on GitHub. It is a 2-layer board of 86.3 × 42.8 mm with 53 parts on 16 nets, routed with 119 tracks and 4 vias.
Its parts include 44 connectors, 3 resistors and 2 diodes.
README
README.mdehryk.github.com
This is my github pages repo, viewable at ehryk.github.io. It also has some setup files that I sync between various computers, most notably git and bash aliases.
Github Pages (/, /js, /css, /img)
- xkcd 1288 Substitutions Bookmarklet
/linux && /git
These are the settings I sync between various computers. Update Config.bat for windows, update-config.sh for linux.
/rainmeter
Custom Rainmeter skins for GPU and CPU temps, etc.
/brian
Brian's Stuff. See more at Dr. Bird.org
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | +12V | Footprints:WIRE-12AWG | J12, J14, J15, J16, J20, J21, J22, J23, J28, J29, J30, J31, J36, J37, J38 |
| 15 | 0V | Footprints:WIRE-12AWG | J13, J17, J18, J19, J24, J25, J26, J27, J32, J33, J34, J35, J39, J40, J41 |
| 4 | Val** | Footprints:M3_Screw_Hole | Ref**, Ref**, Ref**, Ref** |
| 2 | +12V | Footprints:WIRE-16AWG | J42, J43 |
| 2 | 0V | Footprints:WIRE-16AWG | J44, J45 |
| 2 | 470Ω | Resistors_SMD:R_1206_HandSoldering | R2, R4 |
| 1 | 12Vsb | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | 22kΩ | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | 32x2P Card Edge | Footprints:CommonSlot_2x32P_2.54mm | J1 |
| 1 | A0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J9 |
| 1 | A1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J10 |
| 1 | A2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J11 |
| 1 | Active | LEDs:LED_1206_HandSoldering | D3 |
| 1 | EN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Isense | Footprints:WIRE-16AWG | J46 |
| 1 | Standby | LEDs:LED_1206_HandSoldering | D2 |
| 1 | Status | Footprints:WIRE-20AWG | J47 |
| 1 | Vdisplay | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J7 |
More from Ehryk/ehryk.github.com
12- 2 layers17.8 × 30.5 mm

- 2 layers80.8 × 56.9 mm

- 2 layers82.3 × 40.9 mm

- 4 layers44 × 64 mm

- 2 layers73.7 × 48.9 mm

- 2 layers50 × 57 mm

- 2 layers68.5 × 62 mm

- 2 layers116.8 × 162.6 mm

- 2 layers21.2 × 77.6 mm

- 2 layers14.7 × 16.2 mm

- 2 layers47 × 44 mm

- 2 layers86.9 × 20.8 mm

Similar boards
- 2 layers217.1 × 393.8 mm

Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k - 2 layers121.9 × 81.3 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0 - 2 layers48 × 48 mm

- 2 layers103.7 × 74.1 mm

PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805 - 2 layers60.5 × 76.8 mm

Headphones prototype pcb
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
53 parts493MIT - 2 layers59.1 × 26.1 mm

- 2 layers49 × 49 mm

Open source BMS
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
53 parts248 - 2 layers39 × 40 mm

Mdb bridge esp32s3
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
53 parts190MIT
Questions
How big is the Common Slot Mini v1 PCB?
It measures 86.3 × 42.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Common Slot Mini v1 use?
53 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Common Slot Mini v1 KiCad files?
From the Ehryk/ehryk.github.com repository on GitHub, at the commit this page was made from: the board is Circuits/Common Slot PSU Card/Common Slot Mini v1/Common Slot Mini v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Common Slot Mini v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ehryk before reusing the design.