

Le oeuf
An ultra-low profile (Kailh PG1316S) keyboard inspired by Le Chiffre.
- Size
- 215.1 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 93
- Pads
- 450
- Tracks, vias
- 1,386, 92
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Nov 2024
- Updated
- 14 May 2025
Overview
Le oeuf is an open-source printed circuit board by eggsworks, from the eggsworks/le-oeuf-v2 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 215.1 × 85 mm with 110 parts on 93 nets, routed with 1,386 tracks and 92 vias.
It is built around the E73-2G4M08S1C, TP4054 and TPUSBLC6-2SC6, with the 1N5819W, 0603CG120J500NT and RC0603FR-071KL among its other parts. Its parts include 40 diodes, 37 switches, 7 resistors, 5 capacitors and 5 connectors.
Main components
12E73-2G4M08S1C
SMD,18x13mm-103dBm、-95dBm -40℃~+85℃ 120m 17.05mA 3.3V 8.27mA 8dBm Bluetooth 5.0、Bluetooth 4.2 PWM、SPI、ADC、USB、I2C、ISP、JTAG、DMA nRF52840 Chip SMD,18x13mm Bluetooth Modules ROHSChengdu Ebyte Elec TechBluetooth ModulesTP4054
SOT-23-5L-40℃~+85℃ 1 25uA 4.2V 4.2V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 SOT-23-5L Battery Management ROHSUMWBattery ManagementTPUSBLC6-2SC6
SOT-23-6-55℃~+125℃ 0.35pF、0.8pF 100nA 15V 2 5V 9V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)1N5819W
SOD-12313A 350mA 40V 5uA@30V 600mV@200mA Standalone SOD-123 Schottky Diodes ROHSJSMSEMISchottky Diodes0603CG120J500NT
060312pF 50V C0G ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTRC0603FR-071KL
UncategorisedUnknown makerEVQPUC02K
SMD,4.7x4.5mm-20℃~+70℃ 1.65mm 100,000 cycles 12V 2.2N 4.5mm 4.7mm 50mA PC Pin Rectangular Button SPST Surface Mount, Right Angle SMD,4.7x4.5mm Tactile Switches ROHSPanasonicTactile SwitchesHPZ1608U121-2R0TF
0603-55℃~+125℃ 1 120Ω@100MHz 2A 55mΩ ±25% 0603 Ferrite Beads ROHSSunlordFerrite BeadsRC0603FR-07100KL
UncategorisedUnknown makerMLF1608E100JT000
060310mA 10uH 1Ω 30@2MHz 30MHz ±5% 0603 Inductors (SMD) ROHSTDKInductors (SMD)X161032768KLD2SI
SMD1610-2P-40℃~+85℃ 100kΩ 32.768kHz 9pF Crystal Oscillator ±20ppm SMD1610-2P Crystals ROHSYXCCrystalsBSMD1206-050-6V
1206-40℃~+85℃ 1.9mm 100A 100ms 150mΩ 1A 1mm 3.6mm 500mA 600mW 6V 700mΩ 1206 Resettable Fuses ROHSBHFUSEResettable Fuses
README
README.mdL'oeuf
An ultra-low profile (Kailh PG1316S) keyboard inspired by Le Chiffre.

PCB
L'oeuf is a semi-integrated PCB using an E73 BLE module. It is intended to be fully SMT assembled.

A mid-mount USB-C port and JST ACH battery connector keep the board as thin as possible.
Firmware
ZMK firmware available from eggsworks/zmk-config
License
This design is available under the terms of the CERN-OHL-S.
Acknowledgements
- Inspired by the original tominabox1/Le-Chiffre-Keyboard
- E73 supporting circuitry derived from krikun98/Willis
- MCU footprint derived from ebastler/marbastlib
- Switch footprint derived from mikeholscher/zmk-config-mikefive
- Layout derived from ergogen source supplied for sporkus/le_capybara_keyboard
- PCB art kindly provided by transthropology
Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | 1N5819W | le-oeuf:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +21 |
| 37 | PG1425 | le-oeuf:CPG1316S01D02_mikeholscher | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +21 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | EVQPUC02K | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | RSW1, RSW2 |
| 2 | HPZ1608U121 | Inductor_SMD:L_0603_1608Metric | L1, L2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 32.768kHz 9pF | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | X1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | AO3407 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BLUE | LED_SMD:LED_1206_3216Metric | D37 |
| 1 | BM02B-ACHSS-GAN-ETF | Connector_JST:JST_ACH_BM02B-ACHSS-GAN-ETF_1x02-1MP_P1.20mm_Vertical | J1 |
| 1 | BSD3C051V | Diode_SMD:D_SOD-323 | D38 |
| 1 | Battery | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | E73-2G4M08S1C-52840 | PCM_marbastlib-various:nRF52840_E73-2G4M08S1C | U1 |
| 1 | RED | LED_SMD:LED_1206_3216Metric | D39 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | TC2030_SWD | PCM_marbastlib-various:CON_TC2030_outlined | J3 |
| 1 | TP4054 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TYPE-C-31-M-14 | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-14 | J5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
The 105 most common of 110 parts.
Similar boards
- 2 layers188.9 × 83.9 mm

- 2 layers135.8 × 86.3 mm

Shobo right
krikun98/Shobo
Wireless split keyboard built around Framework One Key modules
52 parts2CERN-OHL-P-2.0 - 4 layers170.2 × 79 mm

- 4 layers191.5 × 121.8 mm

Foxhunt1
gx1400/kicad_foxhunt_batterytest
Custom amateur radio fox hunt (hidden transmitter) controller, aimed at being a flexible, dynamic platform for a wide range of fox-hunt formats — not just a fixed single-mode beacon.
260 parts - 2 layers133 × 114.7 mm

- 2 layers226 × 94.2 mm

Calcite60
siderakb/calcite
60/52 keys Kailh Choc V1 low profile switches ortho keyboard
196 parts12CERN-OHL-P-2.0 - 2 layers225 × 74.8 mm

- 2 layers219.4 × 78 mm

Questions
How big is the Le oeuf PCB?
It measures 215.1 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Le oeuf use?
110 parts, built around the E73-2G4M08S1C, TP4054, TPUSBLC6-2SC6 and 1N5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Le oeuf KiCad files?
From the eggsworks/le-oeuf-v2 repository on GitHub, at the commit this page was made from: the board is le-oeuf/le-oeuf.kicad_pcb and its schematic le-oeuf/le-oeuf.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Le oeuf design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).