2 layers105.4 × 76.5 mm
4 layers132.6 × 100 mm
Anarchytechnobox
edwindertien/foundscapemidi control of things that tap and go boink
- Size
- 132.6 × 100 mm
- Copper layers
- 4
- Thickness
- 1.66 mm
- Parts
- 292
- Nets
- 234
- Pads
- 1,049
- Tracks, vias
- 2,086, 552
- Pours
- 59
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jun 2025
- Updated
- 29 Aug 2026
Overview
Anarchytechnobox is an open-source printed circuit board by edwindertien, from the edwindertien/foundscape repository on GitHub. It is a 4-layer board of 132.6 × 100 mm with 292 parts on 234 nets, routed with 2,086 tracks and 552 vias.
It is built around the 74LVC1G126Z, DRV8245SQPWPRQ1 and ADPL54203ES8E#PBF, with the XL-1010RGBC-2812B, BAT54AW and PJ-3220-Y among its other parts. Its parts include 107 capacitors, 68 resistors, 18 diodes, 15 connectors and 14 ICs. It belongs with the audio and music boards of this library.
Main components
12
74LVC1G126Z
SOT-553-5-40℃~+125℃ 1 1 1.65V~5.5V 200uA 2ns@3.3V,50pF 32mA 32mA 74LVC Tri-State Unidirectional SOT-553-5 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
DRV8245SQPWPRQ1
HTSSOP-28-40℃~+125℃ 1uA 40mΩ SPI Yes HTSSOP-28 Brushed DC Motor Drivers ROHSTexas InstrumentsGate Drivers
ADPL54203ES8E#PBF
SOIC-8SOIC-8 Isolated DC/DC Converters ROHSAnalog DevicesIsolated DC/DC Converters
XL-1010RGBC-2812B
SMD,1x1mm-20℃~+85℃ 0.35mA 0.8mm 120° 1kHz 1mm 1mm 2000V 200mcd、800mcd、300mcd 4.5V~5.5V 800Kbit/s B:465nm~475nm、R:620nm~625nm、G:520nm~530nm G:525nm、R:625nm、B:470nm Top-mount Water Clear SMD,1x1mm RGB LEDs(Built-in IC) ROHSXINGLIGHTRGB LEDs(Built-In IC)
BAT54AW
SOT-323(SC-70)1 Pair Common Anode 1V@100mA 200mA 2uA@25V 30V SOT-323(SC-70) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
PJ-3220-Y
插件-20℃~+70℃ 3.5mm Headphone Jack 30V 500mA 插件 Audio Connectors ROHSXKB ConnectionAudio Connectors (Headphones)
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
CC0805KRX7R9BB221
0805220pF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
BZT52C5V6
SOD-123Zener Diodeshongjiacheng
TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile Switches
DSS110
SOD-123FL-55℃~+150℃ 100V 100uA@100V 1A 30A 850mV@1A Independent SOD-123FL Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
GT-USB-7010ASV
SMD-40℃~+85℃ 1 1.68mm 10,000 Cycles 16P 24V 3A 7.35mm Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSG-SwitchUSB Connectors
README
README.mdfoundscape
midi control of things that tap and go boink. The basic structure consists of a midi-interface that takes data from Ableton (or similar) and sends events to 'dimmer cards' - being called like that because initially they mostly controlled LED light.
Two behaviours exist on the main board right now which can be set using a small dip switch: either pulse-lenght or pwm duty cycle as third 'velocity' argument in a MIDI command.
current version (still in operation) uses an ATmega328 (started out with the ATmega8 and then the ATmega88 in WinAVR. now it uses the Arduino environment). In the meantime a version has been made using Teensy, but has not been further pursued / produces (when Teensies were made of nonobtanium). On the wishlist a new version with pico
modules
- actuators 3D printfiles for solenoid holders
- atmegaDimmer first generation dimmer/control box, using RS485(dynamixel) protocol, using ATmega328
- RS485adapter RS485 - midi interface using ATmega32U4 (Arduino micro, native USB)
- teensyDimmer update of dimmer/control box, using Teensy 4.0. build, not tested
- picoDimmer new (to be designed) version of the dimmer/control box using RPI Pico 2040/2350
Parts
292| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C11, C12, C13, C14, C15, C16, C17, C21, C22, C23, C25, C27, C103 +30 |
| 20 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +4 |
| 12 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C9, C36, C37, C42, C43, C65, C66, C67, C76, C77, C82, C83 |
| 10 | 10uF 10V | Capacitor_SMD:C_0603_1608Metric | C6, C26, C93, C94, C96, C98, C100, C101, C102, C104 |
| 9 | 1uF 50V | Capacitor_SMD:C_0603_1608Metric | C34, C35, C40, C41, C68, C74, C75, C80, C81 |
| 9 | 470R | Resistor_SMD:R_0402_1005Metric | R1, R12, R15, R25, R26, R27, R28, R41, R44 |
| 8 | 1000uF 50V | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C38, C39, C44, C45, C78, C79, C84, C85 |
| 8 | XL-1010RGBC-2812B | TinyLEDs:XL-1010 | D2, D3, D18, D19, D20, D21, D22, D23 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R18, R20, R21, R22, R23, R24, R67 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R6, R10, R52, R54, R55 |
| 6 | 47uF 10V | Capacitor_SMD:C_1210_3225Metric | C20, C54, C70, C71, C72, C73 |
| 6 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 6 | RED | LED_SMD:LED_0603_1608Metric | D6, D7, D8, D9, D14, D15 |
| 5 | 0R | Resistor_SMD:R_0402_1005Metric | R13, R16, R42, R45, R60 |
| 4 | 100R | Resistor_SMD:R_1206_3216Metric | R39, R53, R65, R66 |
| 4 | 15p | Capacitor_SMD:C_0402_1005Metric | C28, C29, C52, C53 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R11, R47, R48 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R30, R31, R33, R34 |
| 4 | 620R | Resistor_SMD:R_0402_1005Metric | R14, R17, R43, R46 |
| 4 | DRV8245SQPWPRQ1 | parts:TI_HTSSOP-28-M | U11, U12, U20, U21 |
| 4 | ISO7740DWR | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U9, U10, U13, U14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H3, H4, H6 |
| 4 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J3, J4, J5, J6 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R3, R35, R68 |
| 3 | 1uF 25V | Capacitor_SMD:C_0402_1005Metric | C10, C18, C19 |
| 3 | BLM18PG121SN1D_C14709 | Inductor_SMD:L_0603_1608Metric | L1, L2, L5 |
| 2 | 15uH | parts:PSPMAA0402 | L3, L4 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric | R49, R50 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric | R61, R62 |
| 2 | 22k | Resistor_SMD:R_0402_1005Metric | R57, R58 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 4.7n 100v | Capacitor_SMD:C_1206_3216Metric | C24, C107 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 6.8n | Capacitor_SMD:C_0603_1608Metric | C105, C106 |
| 2 | BAT54AW | Package_TO_SOT_SMD:SOT-323_SC-70 | D4, D5 |
| 2 | Conn_01x04 | Connectors:Grove_1x04 | J9, J10 |
| 2 | G*** | kibuzzard-69839F23 | kibuzzard-69839F23, kibuzzard-69839F23 |
| 2 | G*** | kibuzzard-6985C3FC | kibuzzard-6985C3FC, kibuzzard-6985C3FC |
| 2 | G*** | kibuzzard-6985C404 | kibuzzard-6985C404, kibuzzard-6985C404 |
| 2 | LMR54410FDBVR | Package_TO_SOT_SMD:SOT-23-6 | U3, U22 |
| 2 | PJ-3220-Y | parts:AUDIO-TH_PJ-3220-Y | CN1, CN2 |
| 2 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J11, J12 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R63 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C64 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C57 |
| 1 | 113K | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R51 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric | R56 |
| 1 | 12MHz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Q1 |
| 1 | 150K | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R64 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 220pF | Capacitor_SMD:C_0805_2012Metric | C69 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C63 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C59 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R59 |
| 1 | 74LVC1G126 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | 750311564 | parts:T_Wurth_WE-FB-EP13_16.36 | U19 |
| 1 | ADPL54203ES8E#PBF | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm_ThermalVias | U18 |
| 1 | BZT52C5V6 | Diode_SMD:D_SOD-123 | D13 |
| 1 | C318884 | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J14 |
| 1 | Conn_01x03_Socket | RASPBERRY_SWD:SWD_TOP | J2 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | DSS110 | Diode_SMD:D_SOD-123F | D11 |
| 1 | EC5DAW-24S05N | parts:EC5DAW-24S05N | U1 |
| 1 | Fan_Tacho_PWM | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | G*** | kibuzzard-68E7BE1B | kibuzzard-68E7BE1B |
| 1 | G*** | kibuzzard-68E7BE57 | kibuzzard-68E7BE57 |
| 1 | G*** | kibuzzard-68E7BF0E | kibuzzard-68E7BF0E |
| 1 | G*** | kibuzzard-68E7BB83 | kibuzzard-68E7BB83 |
| 1 | G*** | kibuzzard-68E7BB5C | kibuzzard-68E7BB5C |
| 1 | G*** | kibuzzard-68E7BED4 | kibuzzard-68E7BED4 |
| 1 | GT-USB-7010ASV | ZephKicad:USB-C C2988369 | J1 |
The 273 most common of 292 parts.
Questions
How big is the Anarchytechnobox PCB?
It measures 132.6 × 100 mm and has 4 copper layers, 1.66 mm thick.
What parts does the Anarchytechnobox use?
292 parts, built around the 74LVC1G126Z, DRV8245SQPWPRQ1, ADPL54203ES8E#PBF and XL-1010RGBC-2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Anarchytechnobox KiCad files?
From the edwindertien/foundscape repository on GitHub, at the commit this page was made from: the board is anarchitechno-box/kicad/anarchytechnobox.kicad_pcb and its schematic anarchitechno-box/kicad/MIDI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Anarchytechnobox design in my own project?
Its repository states no licence, so its author keeps all rights: ask edwindertien before reusing the design.
More from edwindertien/foundscape
2- 2 layers46.9 × 19.7 mm
Similar boards
- 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 2 layers101.3 × 39.9 mm
- 2 layers76 × 72 mm
- 4 layers76.6 × 25.1 mm
- 2 layers42 × 98.1 mm
- 2 layers204.3 × 75.1 mm
PanelizedESP32
valeriyproklov/ESP32-devboard
An ESP32 devboard I designed in KiCad.
491 parts2CERN-OHL-P-2.0 - 2 layers101.4 × 69.4 mm
- 2 layers52 × 74 mm
