2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers64 × 110 mm
Capstone f5 kicad
edwa-rd/distillationmonitorLow cost distillation monitor based on Raspberry Pi Pico 2 under Arduino designed to monitor small scale stills to discern distillate outputs.
- Size
- 64 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 45
- Pads
- 182
- Tracks, vias
- 234, 55
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Sep 2025
- Updated
- 6 Apr 2026
Overview
Capstone f5 kicad is an open-source printed circuit board by edwa-rd, from the edwa-rd/distillationmonitor repository on GitHub. It is a 2-layer board of 64 × 110 mm with 50 parts on 45 nets, routed with 234 tracks and 55 vias.
It is built around the DS18B20. Its parts include 7 resistors, 6 capacitors, 6 ICs, 5 connectors and 2 switches. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdLow Cost Distillation Monitor
Low cost distillation monitor based on Raspberry Pi Pico 2 under Arduino designed to monitor small scale stills to discern distillate outputs.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 6 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | DS18B20 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | U3, U4, U5 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | 12V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | BUTTONS | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | ESTOP_NC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | FLOW | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | U6 |
| 1 | G*** | kibuzzard-69ADCB46 | kibuzzard-69ADCB46 |
| 1 | G*** | kibuzzard-69AE0EE6 | kibuzzard-69AE0EE6 |
| 1 | G*** | kibuzzard-69ADCB89 | kibuzzard-69ADCB89 |
| 1 | G*** | kibuzzard-69ADCB3D | kibuzzard-69ADCB3D |
| 1 | G*** | kibuzzard-69ADCDF0 | kibuzzard-69ADCDF0 |
| 1 | G*** | kibuzzard-69AE0E66 | kibuzzard-69AE0E66 |
| 1 | G*** | kibuzzard-69ADCB90 | kibuzzard-69ADCB90 |
| 1 | G*** | kibuzzard-69AE7380 | kibuzzard-69AE7380 |
| 1 | G*** | kibuzzard-69AD179D | kibuzzard-69AD179D |
| 1 | G*** | kibuzzard-69AE094A | kibuzzard-69AE094A |
| 1 | G*** | kibuzzard-69AE0ED5 | kibuzzard-69AE0ED5 |
| 1 | G*** | kibuzzard-69AE0E73 | kibuzzard-69AE0E73 |
| 1 | G*** | kibuzzard-69AE0E79 | kibuzzard-69AE0E79 |
| 1 | I2C | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | L293 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_SMD_HandSolder | A1 |
| 1 | VALVE | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | U2 |
| 1 | VSYS | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | edwork_qr_code | capstone_f5_footprints:edwork_qr_code | Edward |
| 1 | ethan_linkedin_qr_code | capstone_f5_footprints:ethan_linkedin_qr_code | Ethan |
| 1 | jp_linkedin_qr_code | capstone_f5_footprints:jp_linkedin_qr_code | JP |
| 1 | kody_linkedin_qr | capstone_f5_footprints:kody_linkedin_qr | Kody |
| 1 | nihaar_qr_code | capstone_f5_footprints:nihaar_qr_code | Nihaar |
| 1 | sean_linkedin_qr_code | capstone_f5_footprints:sean_linkedin_qr_code | Sean |
Questions
How big is the Capstone f5 kicad PCB?
It measures 64 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Capstone f5 kicad use?
50 parts, built around the DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Capstone f5 kicad KiCad files?
From the edwa-rd/distillationmonitor repository on GitHub, at the commit this page was made from: the board is temp_controller_kicad/capstone_f5_kicad.kicad_pcb and its schematic temp_controller_kicad/capstone_f5_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Capstone f5 kicad design in my own project?
Its repository states no licence, so its author keeps all rights: ask edwa-rd before reusing the design.
Similar boards
- 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers80 × 54.9 mm
ESP32WifiAisTempVolt2
AK-Homberger/NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
18 parts94GPL-3.0 - 2 layers52 × 61 mm
Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 2 layers69 × 57 mm
- 2 layers26 × 34.8 mm
- 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers123 × 87.5 mm
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.
180 parts23MIT