
Protector de Tesoro
edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.

Este repositorio almacena el diseño de circuito impreso (PCB) desarrollado en KiCad para la plataforma PTuP versión 2026.
PTuP 2026 is an open-source printed circuit board by edgranzella, from the edgranzella/PTuP_2026 repository on GitHub. It is a 2-layer board of 170 × 55 mm with 89 parts on 81 nets, routed with 966 tracks and 85 vias.
It is built around the SN75176AP, 74HC14 and LM339, with the MAX706M/TR, BC548 and DIP12-1C90-51L among its other parts. Its parts include 33 resistors, 14 capacitors, 14 connectors, 11 diodes and 6 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Este repositorio almacena el diseño de circuito impreso (PCB) desarrollado en KiCad para la plataforma PTuP versión 2026. Representa la actualización tecnológica del núcleo de procesamiento y control para los sistemas de protección de tesoros.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R17, R21, R22, R24, R25, R26, R27, R28, R29, R33, R34, R35, R36 +2 |
| 11 | 1K | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R11, R12, R13, R14, R15, R18, R19, R20 |
| 10 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C6, C7, C10, C11, C12, C13, C14 |
| 7 | 1N4148 | Damian_Lib:D_DO-35_SOD27_P5.08mm_Horizontal | D1, D2, D3, D4, D5, D6, D10 |
| 5 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5 |
| 4 | Conn_01x01_Pin | Damian_Lib:MountingHole_3.2mm_M3_Pad_Via_PTuP_2026 | J11, J12, J13, J14 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C8, C9 |
| 2 | 3K3 | Resistor_SMD:R_0805_2012Metric | R16, R23 |
| 2 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | DIP12-1C90-51L | Relay_THT:Relay_StandexMeder_DIP_LowProfile | K1, K2 |
| 2 | TBP01R1-508-05BE | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal | J1, J2 |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | APEQ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | ATmega1284P-A (TQFP) | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | FABRICA | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Green | LED_THT:LED_D3.0mm | D7 |
| 1 | ISP-PROGRAMMER | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | LM339 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | LTS-6960HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1 |
| 1 | MAX706 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Red | LED_THT:LED_D3.0mm | D9 |
| 1 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D11 |
| 1 | SN75176AP | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | TBP01R1-508-02BE | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J8 |
| 1 | Teclado 3x4 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Yellow | LED_THT:LED_D3.0mm | D8 |

edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.

edgranzella/PTuP_2026_displayLCD
Este repositorio contiene la variante de hardware desarrollada en KiCad del sistema PTuP 2026, la cual integra una interfaz HMI local basada en un Display LCD (caracteres 16x2 / 20x4 o gráfico) para visualización de…

edgranzella/PTuP_2026_displayLCD_8Zonas_4Salidas
Este repositorio contiene el diseño electrónico y ruteado de PCB avanzado desarrollado en KiCad para el módulo PTuP 2026.

edgranzella/Temporizador_Magnetico_Puerta
Este repositorio contiene el diseño de hardware en KiCad para el módulo Temporizador Magnético de Puerta. Dispositivo diseñado para controlar de manera autónoma los tiempos de apertura, cierre seguro y retención de…


ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

acanyulaf/24V-10A-BLDC-Driver
This is a technical assignment problem given by Kuartis. The aim is to design a 24V/10A BLDC controller. There will be also an I2C or SPI interface for control inputs.

edgranzella/Placa-de-Corte-TX
Circuito Impreso de la plaquetita de Corte TX que va apilada sobre el Arduino Nano de la placa Controladora de Fuentes y Carga.
It measures 170 × 55 mm and has 2 copper layers, 1.6 mm thick.
89 parts, built around the SN75176AP, 74HC14, LM339 and MAX706M/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the edgranzella/PTuP_2026 repository on GitHub, at the commit this page was made from: the board is PTuP_2026/PTuP_2026.kicad_pcb and its schematic PTuP_2026/PTuP_2026.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask edgranzella before reusing the design.