
Knob main pcb
EdgerEquals/knob-hardware
This repo holds the hardware for Ed's motorised knob and its Eurorack module (10HP).

This repo holds the hardware for Ed's motorised knob and its Eurorack module (10HP).
Screen adapter is an open-source printed circuit board by EdgerEquals, from the EdgerEquals/knob-hardware repository on GitHub. It is a 2-layer board with 3 parts on 2 nets.
Its parts include 1 capacitor, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
This repo holds the hardware for Ed's motorised knob and its Eurorack module (10HP).
cad/ is the parametric parts library. Each part folder has a build123d script, STEP, DXF and drawing PNG. The parts index is in cad/README.md.cad/pcbs/, which are the single source of truth. Board STEPs are exported from KiCad and feed the mechanical assemblies.The software engine lives in EdgerEquals/dad-page.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | FPC_14P_0.5mm_Top | footprints:FPC_14P_0.5mm_Top | J1 |
| 1 | QFN-20_3x3_P0.4_CH32V003 | footprints:QFN-20_3x3_P0.4_CH32V003 | U1 |
| 1 | TubeRodClamp_Adapter_M1.6 | footprints:TubeRodClamp_Adapter_M1.6 | C1 |

EdgerEquals/knob-hardware
This repo holds the hardware for Ed's motorised knob and its Eurorack module (10HP).


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EdgerEquals/knob-hardware repository on GitHub, at the commit this page was made from: the board is cad/pcbs/screen-adapter/kicad/screen-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EdgerEquals before reusing the design.