Skip to the content
2 layers200 × 21 mmSensors, the printed circuit board in 3D

Code samples and ready projects based on bare-metal STM32

Size
200 × 21 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
11
Pads
57
Tracks, vias
129, 23
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Mar 2015
Updated
10 Oct 2026

Overview

Sensors is an open-source printed circuit board by eddyem, from the eddyem/stm32samples repository on GitHub. It is a 2-layer board of 200 × 21 mm with 25 parts on 11 nets, routed with 129 tracks and 23 vias.

It belongs with the sensors and measurement and computers and single-board computers boards and the STM32 boards of this library.

README

Readme.md

Repository Overview

The stm32samples repository is a collection of low-level, bare-metal code examples and complete projects for various STM32 microcontroller series (F0, F1, F3, F4, G0). It uses CMSIS header files from modm-io/cmsis-header-stm32 for register definitions.

Project Structure by MCU Series

STM32F0 (F030, F042, F072)

  • 3steppersLB – Controls 3 stepper motors with encoders via USB/CAN bus
  • blink – Simple LED toggling
  • CANbus4BTA – CAN replacement for PEP-CAN
  • CANBUS_SSI – Works with BTA SSI azimuth encoder
  • Chiller – Basic chiller temperature controller
  • F0_testbrd – Tests STM32F0x2 on custom board
  • htu21d_nucleo – Reads HTU-21D sensor on Nucleo-F042K
  • morze – Echoes USART1 data as Morse code on TIM3CH1 (PA6)
  • NUCLEO_SPI – SSI over SPI on Nucleo-F042K
  • PL2303_ringbuffer – USB CDC ACM with ring buffers
  • QuadEncoder – Quadrature encoder via timer
  • Servo – Controls SG-90 style servos
  • Socket_fans – Manages multiple fans
  • TM1637 – Drives 7‑segment displays
  • tsys01_nucleo – Reads two TSYS01 sensors
  • uart_blink & uart_blink_dma – USART echo with DMA
  • usbcan_relay – Relay board over CAN bus
  • usbcan_ringbuffer – USB‑CAN adapter with ring buffers
  • USBHID – USB HID keyboard + mouse

STM32F1 (F103)

  • BMP180, BMP280 – I²C temperature/pressure sensors
  • Canon_managing_device – Controls Canon lenses
  • canUART – UART‑CAN bridge
  • DHT22_DHT11 – Humidity sensors using timer+DMA
  • DS18 – DS18x20 temperature sensors
  • F1_testbrd – Test board for LQFP48 packages
  • I2Cscan – I²C scanner with register R/W
  • LED_Screen – Drives 32×16 LED matrices (P10)
  • MAX7219_screen – Controls 8×8 LED matrices
  • RGB_LED_Screen – HUB75E RGB panel with 8.8.4 color
  • SevenCDCs – Seven USB‑CDC ACM instances on one MCU (joke project)
  • shutter – Bistable shutter via USB/external signal
  • Tetris – Tetris on HUB75E panel
  • USB_HID – USB HID mouse+keyboard
  • ws2815 – Rainbow effect on WS2815 strips

STM32F3 (F303)

  • ADC – Works with ADC peripheral
  • blink – Toggles LEDs on PB0/PB1
  • CANusb – USB‑CAN adapter
  • floatPrintf – Converts floats to strings
  • Multistepper – Controls up to 64 multiplexed steppers
  • NitrogenFlooding – Automatic nitrogen flooding
  • PL2303 – PL2303 emulator (old)
  • Seven_CDCs – Seven USB CDC ACM interfaces
  • usart1fullDMA – USART1 Rx/Tx DMA with match detection
  • USB_template_CDC – USB‑CDC template

STM32F4 (F401)

  • blink – Simple LED toggling

STM32G0 (G070, G0B1)

  • blink – Basic LED blink
  • RTC – Real‑time clock
  • flash – Flash memory operations
  • g0b1 – USB‑CDC working on G0B1
  • i2c – I²C operations
  • usart – USART communication

Other Directories

  • deprecated – Archive of older, no‑longer‑maintained code
  • snippets – Small reusable code fragments
  • testboard – KiCad 8 design files

Development Environment

  • Toolchain: arm-none-eabi‑gcc with -flto optimisations
  • Build: Structured Makefiles per series
  • Debug: OpenOCD configuration files provided
  • Libraries: No third‑party libraries; only CMSIS‑SVD headers

Project Maturity

  • Alpha: USB template for F303, MLX90640 all‑sky camera
  • Stable: LED blink, UART echo, sensor interfaces, USB‑CDC
  • Draft: CANbus4BTA, MLX90640multi
  • Deprecated: Older code in deprecated/

Summary

This repository is a valuable resource for learning low‑level STM32 programming without vendor libraries. It covers practical applications:

  • Industrial control: Stepper motors, CAN bus, relay boards
  • Sensor interfacing: Temperature, pressure, humidity, encoders
  • Human‑machine interfaces: LED matrices, 7‑segment displays, USB HID
  • Communication: UART, SPI, I²C, USB‑CDC, USB‑HID, CAN
  • Prototyping: Test boards for F0, F1, F3, G0

For the latest updates, check the repository on GitHub.

License

This repository is provided under the GNU General Public License v3 or later. Full text of the GPLv3 is available at https://www.gnu.org/licenses/gpl-3.0.html.

Parts

25
QtyValueFootprintReferences
6PT1000Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_VerticalTH1, TH2, TH3, TH4, TH5, TH6
4MountingHoleMountingHole:MountingHole_2mmH1, H2, H3, H4
4MountingHoleMountingHole:MountingHole_3.2mm_M3H5, H6, H7, H8
22Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP2, JP4
24Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP3, JP5
10Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP7
11Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
13Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP8
15Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP6
16Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP9
1Conn_01x08J8:avia8J1
1Conn_01x08Connector_PinHeader_2.00mm:PinHeader_1x07_P2.00mm_VerticalJ2

More from eddyem/stm32samples

12
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 2 layers121.5 × 136.5 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    192 parts208
  • 2 layers121.5 × 136.5 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    155 parts208
  • 4 layers80 × 80 mmNitrogen, the printed circuit board in 3D

    Nitrogen

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    140 parts208
  • 2 layers80 × 84 mmMany485, the printed circuit board in 3D

    Many485

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    117 parts208
  • 2 layers97 × 69.5 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    103 parts208
  • 2 layers98 × 63.5 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    98 parts208
  • 2 layers58 × 71 mmMLX90640-allsky, the printed circuit board in 3D

    MLX90640-allsky

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    94 parts208
  • 2 layers97.5 × 59.5 mmChrono, the printed circuit board in 3D

    Chrono

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    90 parts208
  • 2 layers75.5 × 52.5 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    89 parts208
  • 2 layers66 × 54 mmWindshield, the printed circuit board in 3D

    Windshield

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    86 parts208
  • 2 layers65.5 × 41 mmLamps, the printed circuit board in 3D

    Lamps

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    78 parts208

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Sensors PCB?

It measures 200 × 21 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensors use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensors KiCad files?

From the eddyem/stm32samples repository on GitHub, at the commit this page was made from: the board is F3:F303/NitrogenFlooding/kicad/sensors/sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensors design in my own project?

Its repository states no licence, so its author keeps all rights: ask eddyem before reusing the design.