2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers31.5 × 26.7 mm
Generic 3PDT daughterboard.
- Size
- 31.5 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 18
- Tracks, vias
- 26, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Oct 2020
- Updated
- 3 Oct 2020
Overview
3PDT is an open-source printed circuit board by eddcad, from the eddcad/3PDT-GenericDaughterboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31.5 × 26.7 mm with 10 parts on 9 nets, routed with 26 tracks and 0 vias.
Its parts include 9 connectors and 1 switch. It belongs with the audio and music boards of this library.
README
README.md3PDT-DBoard
Very basic 3PDT Daughterbard with no LED or CLR. There is a "No-Net" pour on the board as there is no specific ground to refer to. This arises because the board is intended to be used in conjuction with other boards I have developed that include the full circuit with different pad I/O requirements.
This board is intended to negate the need to individually solder all of the individual legs on the 3PDT to wires (I'm inheritantly lazy, life is too short and I have a mind to waste.)
Having read this, do with it what you will!
Happy soldering.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 3PDTFootswitch | MyLibrary:STOMP_SWITCH_3PDT | sw1 |
| 1 | A1 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J1 |
| 1 | A2 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J2 |
| 1 | A3 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J3 |
| 1 | B1 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J4 |
| 1 | B2 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J5 |
| 1 | B3 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J6 |
| 1 | C1 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J7 |
| 1 | C2 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J8 |
| 1 | C3 | MyLibrary:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | J9 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the 3PDT PCB?
It measures 31.5 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 3PDT use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 3PDT KiCad files?
From the eddcad/3PDT-GenericDaughterboard repository on GitHub, at the commit this page was made from: the board is 3PDT/3PDT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 3PDT design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).