

STM32WB55
A WIP minimal smartwatch based on the ESP32-C3
- Size
- 32 × 38 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 51
- Nets
- 71
- Pads
- 289
- Tracks, vias
- 511, 278
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Dec 2023
- Updated
- 6 Oct 2024
Overview
STM32WB55 is an open-source printed circuit board by edatki, from the edatki/Quectowatch repository on GitHub. It is a 2-layer board of 32 × 38 mm with 51 parts on 71 nets, routed with 511 tracks and 278 vias.
It is built around the BQ27441DRZR-G1A, LIS3DH and TP4054, with the USBLC6-2SC6, XC6206P332MR and 1N5819WS among its other parts. Its parts include 14 resistors, 13 capacitors, 7 connectors, 6 ICs and 5 switches. It belongs with the wearables and radio and wireless boards and the ESP32, STM32 and RISC-V boards of this library.
Main components
8BQ27441DRZR-G1A
SON-12-EP(2.5x4)-40℃~+85℃ 1 2.45V~4.5V 4.2V 93uA I2C Lithium Battery Monitoring IC Support Under-voltage lockout SON-12-EP(2.5x4) Battery Management ROHSTexas InstrumentsBattery ManagementLIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersTP4054
SOT-23-5L-40℃~+85℃ 1 25uA 4.2V 4.2V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 SOT-23-5L Battery Management ROHSUMWBattery ManagementUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R10, R13, R14 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C8, C9, C10, C13 |
| 5 | SW_Push | local:Panasonic_EVQPUA_EVQPUJ | SW1, SW2, SW3, SW4, SW5 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C7, C11 |
| 3 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R12, R15 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D4 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3.3K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AUX | local:1x02_2.54_Pads | J5 |
| 1 | BAT | local:1x02_2.54_Pads | J3 |
| 1 | BQ27441DRZR-G1A | Package_SON:Texas_S-PDSO-N12 | U3 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | LCD | Connector_FFC-FPC:Molex_54548-1071_1x10-1MP_P0.5mm_Horizontal | J4 |
| 1 | LED+ | TestPoint:TestPoint_Pad_2.0x2.0mm | J6 |
| 1 | LED- | TestPoint:TestPoint_Pad_2.0x2.0mm | J7 |
| 1 | LIS3DH | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U5 |
| 1 | PROG | local:1x04_2.54_Pads | J2 |
| 1 | R01 1% | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | STM32WB5MMGH6TR | local:LCC-LGA-86_L11.0-W7.3_STM32WB5MMGH6TR | U2 |
| 1 | TP4054 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | local:USB-C-SMD_SHOUHAN_TYPE-C-16PFS-2JCB1.2-H6.5 | J1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U6 |
More from edatki/Quectowatch
3- 2 layers31.5 × 42 mm

- 2 layers32 × 47 mm

- 2 layers23 × 10 mm

Similar boards
- 4 layers64 × 43 mm

Dalws
anhldptit2610/dalws
This project is my attempt to learn about microcontroller and PCB design. Now I realize that making a full, complete electronic project is super hard.
83 parts2MIT - 4 layers50 × 59 mm

- 4 layers170.2 × 111.2 mm

E paper picture frame HW
JosefTAv/E-paper-picture-frame-HW
Hardware files for ESP32 based E-paper picture frame
110 partsMIT - 4 layers60 × 60 mm

UNSW Rocketry Senior Flight Computer
DashiellRussell/UNSW_Rocketry_Senior_Flight_Computer
KiCad project for the senior flight computer used by UNSW Rocketry.
132 parts - 2 layers75.9 × 74.5 mm

Geheimbadge controller
Geheimorganisation/geheimbadge-hardware
Browse the files on KiCanvas - by Stargirl Flowers
88 partsMIT - 4 layers76 × 72 mm

Keychain rev b panel
olerast67/emotion-keychain
Брелок с OLED-экраном и анимированными эмоциями
168 partsApache-2.0 - 4 layers65 × 56 mm

- 4 layers100 × 91.4 mm

Questions
How big is the STM32WB55 PCB?
It measures 32 × 38 mm and has 2 copper layers, 1 mm thick.
What parts does the STM32WB55 use?
51 parts, built around the BQ27441DRZR-G1A, LIS3DH, TP4054 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32WB55 KiCad files?
From the edatki/Quectowatch repository on GitHub, at the commit this page was made from: the board is STM32WB55/Hardware/Hardware.kicad_pcb and its schematic ESP32/Hardware/Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32WB55 design in my own project?
Its repository states no licence, so its author keeps all rights: ask edatki before reusing the design.