

Final schematic
Schematic and PCB design of Snow-weAR Goggles
- Size
- 53.5 × 60.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 115
- Pads
- 272
- Tracks, vias
- 442, 35
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Oct 2020
- Updated
- 12 Nov 2020
Overview
Final schematic is an open-source printed circuit board by ECE477, from the ECE477/Hardwear-Design repository on GitHub. It is a 2-layer board of 53.5 × 60.6 mm with 54 parts on 115 nets, routed with 442 tracks and 35 vias.
It is built around the RFM95W-868S2. Its parts include 14 resistors, 13 capacitors, 3 diodes, 2 switches and 1 IC. It belongs with the STM32 boards of this library.
Main components
1README
README.mdHardwear Design
Schematic and PCB
PCB Checklist
1 Parts Completion Check
- All major componenets included (ie. Micro, Power Supply, Regulation, Battery Management, IMU, GPS, LoRa, TOLED, Push Buttons, Reset Button, Signal LEDS)
- All support components included (ie. Micro minimum connections, Testing Circuit, Support components package and value(R,Caps,Ind), Application circuits)
Other
- Progamming Header
- Reset Circuit
- Power Connectors
- Mounting holes
- Heartbeat LED
- Debugging LEDs (Transmit LED)
2 PCB Footprint Verification Check
- All parts fir on 1:1 scale printout of PCB
3 Parts Placement Check
- Oscillator close to Micro? (N/A)
- Decoupling caps close to/under related ICs?
- Connectors on board edges?
- Parts grouped by system and/or in reasonable way that minimizes routing?
4 Mechanical/Space Conflict Check:
- Has x- and y- footprint space around electrical pins and pads of all parts been accounted for?
- Has z-height of all parts been accounted for?
- Has clearance been provided for the bolt heads of all mounting holes?
- Have connectors been placed on the outer edges of boards where appropriate? Are they overhanging edges of boards where appropriate? Are they oriented in the correct direction?
- Are all mounting and mechanical support holes free of traces and other electrical items?
5 Routing Completion Check:
- All traces routed? (In Eagle, the ratsnest command will say “nothing to do”)
- Oscillator traces clear of interfering signals?
- Traces of appropriate widths to handle current being passed? (Including power traces)
- Traces entering pads at 90-degree angles (or 45 degree angles, where appropriate)?
6 Routing Minimization Check:
- Trace lengths have been minimized where possible?
- Octagonal (45-degree constrained) layout mode has been utilized, where possible?
- Right angles have been removed, except where necessary?
- Acute angles have been eliminated from all board routing?
7 Via Minimization Check:
- Vias have been eliminated to extent reasonable?
- Signal planes on opposite sides of boards are connected by vias at reasonable intervals?
- Signal Plane Check:
- Signal planes have been included, where reasonable?
- Analog ground (AGND), has been separated from the main ground net in accordance with microcontroller datasheets?
- Isolation on all signal planes has been set to at least 12 mils?
9 Silkscreen check
- Silkscreen labels have been provided for all component IDs and connector signal names?
- Silkscreen labels have been appropriately placed near components, but not on top of pads or pins?
- Pin 1 of all ICs and other polarity-sensitive components (such as diodes) is clearly marked?
- Board silkscreen layer includes course and team number "ECE477 Group "?
- Board silkscreen layer includes names of all team members, if possible?
- Board silkscreen layer includes a descriptive name to identify the board?
- Board silkscreen layer includes a revision number and/or last modified date?
10 Gerber Check
- Gerber files have been inspected by a gerber viewer program (e.g. gerbv) to check for any last-minute software CAM-processing defects
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R12, R13, R14 |
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C10, C11, C13 |
| 5 | 62 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R9, R10, R11 |
| 3 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 2 | LOGO | footprint_lib:logo2 | G***, G*** |
| 1 | .1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C19 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 2.5mm | MountingHole:MountingHole_2.5mm | 2.5mm |
| 1 | 3.3uF | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W_Pad2.25x2.55mm_HandSolder | C12 |
| 1 | BB_SYSOFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SYSOFF |
| 1 | Battery Babysitter | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | BB |
| 1 | D_Zener | footprint_lib:1N5355BRLG | D3 |
| 1 | GPS_COAX | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J8 |
| 1 | IMU_QWIIC | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | IMU |
| 1 | LED_HEARTBEAT_R1 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_TRANSMIT_G1 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LT1129-3.3_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | V_REG |
| 1 | LoRa_Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | RADIO_COAX |
| 1 | MTK3339 | footprint_lib:FGPMMOPA6H | GPS |
| 1 | OLED Qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | OLED Qwiic |
| 1 | ON/OFF-SWITCH | Button_Switch_SMD:SW_SP3T_PCM13 | S1 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | PROG |
| 1 | RFM95W-868S2 | RF_Module:HOPERF_RFM9XW_SMD | RADIO |
| 1 | STM32L476VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | MICRO |
| 1 | SW_Push_RADIO | Button_Switch_SMD:SW_SPST_PTS645 | RADIO PUSH |
| 1 | SW_Push_RST | footprint_lib:SW_1825910-6-4 | SW3 |
| 1 | SW_Push_SESS | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SESS |
| 1 | TC2014-3.3VxCTTR | Package_TO_SOT_SMD:SOT-23-5 | U6 |
The 49 most common of 54 parts.
More from ECE477/Hardwear-Design
2- 2 layers

- 2 layers79.7 × 54.1 mm

Similar boards
- 4 layers66.3 × 40.2 mm

Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers83 × 109 mm

- 2 layers57 × 35.5 mm

- 2 layers45 × 53 mm

LoRa Node
cernohorsky/LoRa-Node
Simple LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna.
35 parts66 - 2 layers72 × 27 mm

- 2 layers61.5 × 18.7 mm

LoRA USBStick
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
36 parts50GPL-3.0 - 2 layers79.2 × 68.8 mm

Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 2 layers50 × 25 mm

LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the Final schematic PCB?
It measures 53.5 × 60.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Final schematic use?
54 parts, built around the RFM95W-868S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Final schematic KiCad files?
From the ECE477/Hardwear-Design repository on GitHub, at the commit this page was made from: the board is final_schematic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Final schematic design in my own project?
Its repository states no licence, so its author keeps all rights: ask ECE477 before reusing the design.