2 layers99.1 × 99.1 mm
2 layers99.1 × 99.1 mm
Interface
eblade/synthSynth stuff
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 60
- Pads
- 174
- Tracks, vias
- 180, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Oct 2019
- Updated
- 18 Sep 2024
Overview
Interface is an open-source printed circuit board by eblade, from the eblade/synth repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 56 parts on 60 nets, routed with 180 tracks and 0 vias.
Its parts include 22 connectors, 12 resistors, 8 diodes and 4 switches. It belongs with the interfaces and adapters boards of this library.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10, R11, R12 |
| 6 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D3, D4, D5, D6, D7, D8 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R5 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6 |
| 1 | BOTTOM | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J21 |
| 1 | CLOCK_SW | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | DIR_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | EXTPOS_ATT | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV5 |
| 1 | EXTPOS_OFFSET | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV2 |
| 1 | EXT_CLOCK_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2 |
| 1 | EXT_POS_CV | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J8 |
| 1 | EXT_RATE_CV | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | INT_CLOCK_OUT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | LED_INT_CLOCK | LED_THT:LED_D3.0mm | D1 |
| 1 | LED_STEP_PULSE | LED_THT:LED_D3.0mm | D2 |
| 1 | OFFSET_A | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J10 |
| 1 | OFFSET_B | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J11 |
| 1 | OFFSET_C | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J12 |
| 1 | OFFSET_D | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J13 |
| 1 | OUTPUT_A | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J14 |
| 1 | OUTPUT_B | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J15 |
| 1 | OUTPUT_C | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J16 |
| 1 | OUTPUT_D | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J17 |
| 1 | OUTPUT_E | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J18 |
| 1 | OUTPUT_F | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J19 |
| 1 | PULSELEN_ATT | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV6 |
| 1 | PULSELEN_CV | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J9 |
| 1 | PULSELEN_OFFSET | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV3 |
| 1 | RATE_ATT | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV4 |
| 1 | RATE_OFFSET | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
| 1 | RESET_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | RESET_SW | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J22 |
| 1 | SEQ_DIR | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW4 |
| 1 | STEP_OUT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | TOP | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J20 |
| 1 | ZERO_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | ZERO_SW | Button_Switch_THT:SW_PUSH_6mm | SW3 |
Questions
How big is the Interface PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Interface use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Interface KiCad files?
From the eblade/synth repository on GitHub, at the commit this page was made from: the board is megasequencer/interface/interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask eblade before reusing the design.
More from eblade/synth
12- 2 layers100 × 100 mm
- 2 layers99.1 × 99.1 mm
- 2 layers99.1 × 99.1 mm
- 2 layers99.1 × 99.1 mm
- 2 layers99.1 × 99.1 mm
- 2 layers33 × 99.1 mm
- 2 layers66 × 99.1 mm
- 2 layers66 × 99.1 mm
- 2 layers87.4 × 66.8 mm
- 2 layers99.1 × 99.1 mm
- 2 layers37.8 × 23.9 mm
Similar boards
- 2 layers90 × 38 mm
LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
56 parts1.5k - 2 layers50.4 × 48.4 mm
Distortion
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
56 parts915 - 2 layers27 × 24.7 mm
- 2 layers123.9 × 94.4 mm
- 2 layers120.6 × 85.5 mm
KLOTZ
GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.
56 parts287GPL-3.0 - 2 layers136 × 91.7 mm
One
ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.
56 parts210CERN-OHL-P-2.0 - 2 layers78.5 × 69 mm
Kicad cpu board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
56 parts171 - 2 layers45 × 45 mm
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130