
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

PCB Heltec v3 i2c is an open-source printed circuit board by ebirn, from the ebirn/PCB_Heltec_v3_i2c repository on GitHub. It is a 2-layer board of 27.9 × 72.4 mm with 12 parts on 33 nets, routed with 74 tracks and 0 vias.
Its parts include 6 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
poka-yoke from: https://github.com/PabloOyarzo/poka-yoke_rxtx/tree/main
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | , , | ||
| 2 | PINHD_1x4_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6, J7 |
| 2 | i2c | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | ESP32_LORA_V2.0 | ESP32_LORA_V2:MODULE_ESP32_LORA_V2.0 | U1 |
| 1 | i2c | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | U2 |
The 11 most common of 12 parts.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 27.9 × 72.4 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ebirn/PCB_Heltec_v3_i2c repository on GitHub, at the commit this page was made from: the board is PCB_Heltec_v3_i2c.kicad_pcb and its schematic PCB_Heltec_v3_i2c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ebirn before reusing the design.