
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

AES/EBU to S/PDIF adapter PCB
Aesebu adapter is an open-source printed circuit board by eaxsi, from the eaxsi/aesebu_spdif_adapter repository on GitHub. It is a 2-layer board of 87.6 × 50.8 mm with 10 parts on 4 nets, routed with 22 tracks and 0 vias.
Its parts include 4 resistors and 2 switches. It belongs with the interfaces and adapters boards of this library.
A simple passive adapter to connect AES/EBU source to S/PDIF input device.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | P*** | 1pin | , , , |
| 1 | 120 | R3-5 | R4 |
| 1 | 130 | R3-5 | R2 |
| 1 | 56 | R3-5 | R1 |
| 1 | 82 | R3-5 | R3 |
| 1 | RCA | R3-LARGE_PADS | K2 |
| 1 | XLR3 | XLR3MC | K1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 87.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eaxsi/aesebu_spdif_adapter repository on GitHub, at the commit this page was made from: the board is aesebu_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eaxsi before reusing the design.