
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Simple circuit to fire a solenoid
Solenoid trigger is an open-source printed circuit board by eatnooM, from the eatnooM/solenoid-trigger repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 15 × 22.8 mm with 10 parts on 5 nets, routed with 13 tracks and 0 vias.
Its parts include 7 diodes, 2 resistors and 1 transistor.

License: CC BY-SA 4.0
A simple board to fire a solenoid using an external power supply, without exposing the signal source to the solenoid's power.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | ThroughHole-1.5MM-plated | solenoid-trigger:ThroughHole-1.5MM-plated | D7, GND, GND, L1, L2, VDD |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 15 × 22.8 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eatnooM/solenoid-trigger repository on GitHub, at the commit this page was made from: the board is solenoid-trigger.kicad_pcb and its schematic solenoid-trigger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).