
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Two-layer printed circuit board layout for DC regulated power for mic and sensor probes
EN Probe VR 2 is an open-source printed circuit board by Earth-Biometrics, from the Earth-Biometrics/probes-interface-pcb repository on GitHub. It is a 2-layer board of 34.9 × 22.9 mm with 25 parts on 13 nets, routed with 174 tracks and 12 vias.
It is built around the CRCW080522R0JNEAC. Its parts include 9 capacitors, 4 connectors, 2 ICs, 2 inductors and 1 resistor. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | FerriteBead:0805 | C1, C3, C5, C7 |
| 3 | 0.1UF | FerriteBead:0603 | C4, C6, C8 |
| 3 | CRCW080522R0JNEA | EN_Probe_VR:0805 | 3V3, 5V, GND |
| 3 | Comment | SC MINI Merge 4.08:HDR1X4 | J2, J3, J4 |
| 1 | .33UF | FerriteBead:0805 | C2 |
| 1 | 1.0uH | FerriteBead:1206 | L2 |
| 1 | 2.2uH | FerriteBead:1206 | L1 |
| 1 | 2.8V REG | Display adapter 20 to 20p4.5.2:SOT23-3 | U2 |
| 1 | 3.3V REG | Display adapter 20 to 20p4.5.2:SOT23-3 | U1 |
| 1 | 680nF | FerriteBead:0805 | C9 |
| 1 | AUDIO OUT | EN_Probe_VR:HDRA1X4 2MM | |
| 1 | CRCW080522R0JNEA | SugarCube SCADng_R2.6 02:0805 | R1 |
| 1 | Comment | 527450697:CON_527450697_ | J5 |
| 1 | I2C-IN | EN_Probe_VR:HDRA1X4 2MM | |
| 1 | MEMS | Display adapter 20 to 20p4.5.2:HDR1X5 | x5 |
| 1 | SENSOR | EN_Probe_VR:HDRA1X4 2MM |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 34.9 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the CRCW080522R0JNEAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Earth-Biometrics/probes-interface-pcb repository on GitHub, at the commit this page was made from: the board is kicad/EN_Probe_VR_2.kicad_pcb and its schematic kicad/EN_Probe_VR_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Earth-Biometrics before reusing the design.