
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

A one to muliple CAN hub PCB
Can expansion hub is an open-source printed circuit board by eamars, from the eamars/can_expansion_hub repository on GitHub. It is a 2-layer board of 74.7 × 22.9 mm with 7 parts on 4 nets, routed with 29 tracks and 0 vias.
The CAN hub is designed to expand the number of CAN devices without needing to make custom wiring loom.

BOM (with LCSC part number) and gerber files are provided under production directory.
Revisions
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | P5.00 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J1, J2, J3, J4, J5 |
The 5 most common of 7 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 74.7 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eamars/can_expansion_hub repository on GitHub, at the commit this page was made from: the board is pcb/can_expansion_hub.kicad_pcb and its schematic pcb/can_expansion_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eamars before reusing the design.