Skip to the content
2 layers99.2 × 99.6 mmGalapagos, the printed circuit board in 3D
Size
99.2 × 99.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
28
Pads
403
Tracks, vias
1,090, 65
Routed
Yes
KiCad
KiCad 5 (file 20210228)
Created
11 Jan 2022
Updated
24 Jan 2022

Overview

Galapagos is an open-source printed circuit board by e3w2q, from the e3w2q/Galapagos-protoboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.2 × 99.6 mm with 43 parts on 28 nets, routed with 1,090 tracks and 65 vias.

Its parts include 14 connectors, 11 switches, 6 diodes, 3 ICs and 1 inductor. It belongs with the RP2040, AVR (ATmega, ATtiny) and SAM D and SAM boards of this library.

README

pcb/README.md

Galapagos Protoboard

Schematic

Schematic PDF Schematic

PCB Layout

PCB Layout PCB Layout

Acrylic Layout

Acrylic Layout

Parts

43
QtyValueFootprintReferences
6Conn_01x06#footprint:JST_SH_BM03B-SRSS-TB_1x06-1MP_P1.00mm_VerticalJ1, J13, J14, J16, J18, J19
6D#footprint:diode_TH_SMD_rev3D13, D14, D17, D18, D33, D34
6SW_Push#footprint:CherryMX_MidHeight_Choc_Hotswap_rev8_testSW13, SW14, SW17, SW18, SW33, SW34
4Conn_01x04#footprint:JST_SH_BM03B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ5, J6, J11, J12
2Conn_01x04#footprint:JST_ZH_1x04_P1.50mm_VerticalJ20, J21
1Conn_01x04#footprint:PinHeader_1x04_P2.54mm_VerticalJ10
1Joystick#footprint:Joystick_SparkfanSW44
1Joystick#footprint:Joystick_AE-RKJXV122400RSW43
1Joystick_N_Switch#footprint:Joystick_N_SwitchSW45
1MJ-4PP-9#footprint:MJ-4PP-9_reversibleJ9
1Pico#footprint:RPi_Pico_SMD_TH_rev3U2
1ProMicro/BLEMicroPro#footprint:ArduinoProMicro_ConThroughU1
1RESET#footprint:ResetSWSW41
1Rotary_Encoder#footprint:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_rev2SW42
1SeeeduinoXIAO#footprint:Seeeduino XIAO RP2040U3
1YS_SK6812MINI_E#footprint:YS-SK6812MINI-EL1

The 35 most common of 43 parts.

Similar boards

  • 2 layers52.2 × 52.2 mmBase, the printed circuit board in 3D

    Base

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    43 parts3kApache-2.0
  • 2 layers33 × 34 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    43 parts608GPL-3.0
  • 2 layers42.9 × 19 mmPoly kb 2.25U, the printed circuit board in 3D

    Poly kb 2.25U

    thpoll83/PolyKybd

    PolyKybd

    43 parts411CERN-OHL-W-2.0
  • 2 layers99.1 × 99.7 mmRC6502 Prototyping, the printed circuit board in 3D

    RC6502 Prototyping

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    43 parts193GPL-3.0
  • 2 layers26.6 × 38.7 mmMdb slave esp32s3-mini, the printed circuit board in 3D

    Mdb slave esp32s3-mini

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    43 parts190MIT
  • 2 layers97.3 × 71 mmZynScreen v1, the printed circuit board in 3D

    ZynScreen v1

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    43 parts156

Questions

How big is the Galapagos PCB?

It measures 99.2 × 99.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Galapagos use?

43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Galapagos KiCad files?

From the e3w2q/Galapagos-protoboard repository on GitHub, at the commit this page was made from: the board is pcb/galapagos.kicad_pcb and its schematic pcb/galapagos.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Galapagos design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).