

SigClipIndicator
Misc smart house hardware
- Size
- 30.5 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 20
- Pads
- 69
- Tracks, vias
- 140, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
SigClipIndicator is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 30.5 × 22.9 mm with 28 parts on 20 nets, routed with 140 tracks and 10 vias.
It is built around the LM2903. Its parts include 12 resistors, 7 diodes, 4 capacitors, 2 connectors and 1 IC.
Main components
1README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2,2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R5, R7, R8 |
| 4 | D | Diode_SMD:D_MiniMELF_Handsoldering | D2, D5, D6, D7 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R10 |
| 2 | 10,0 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 22,0 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 47 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R9 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 1m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 33 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | Green | LED_THT:LED_D3.0mm | D9 |
| 1 | IO | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Ins | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | LM2903 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | R/G | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | Red | LED_THT:LED_D3.0mm | D4 |
More from dzavalishin/hardware
12- 2 layers

- 2 layers156.2 × 86.4 mm

- 2 layers

- 2 layers124.5 × 81.3 mm

- 2 layers254 × 55.9 mm

- 2 layers71 × 140 mm

- 2 layers106.7 × 58.4 mm

- 2 layers108 × 77.5 mm

- 2 layers68.9 × 118.5 mm

- 2 layers155 × 58 mm

- 2 layers90.2 × 72.4 mm

- 2 layers20.3 × 200.7 mm

Similar boards
- 2 layers100 × 50 mm

- 4 layers241.7 × 56.7 mm

- 2 layers

- 2 layers101.6 × 114.3 mm

- 4 layers217 × 139 mm

- 4 layers94 × 52.1 mm

Stm32 ltc encoder
max-verem/stm32_ltc_encoder
STM32 based SMPTE Linear Timecode Generator/Reader, isolated input/output
50 parts3 - 2 layers83.7 × 91.6 mm

BMW E30 Early Cluster EG
Ansel84/BMW-E30-Gauge-Cluster-Early-Model
This project is the documentation of reverse engineering the BMW E30 gauge cluster for pre 1988 model years.
49 parts2MIT - 2 layers55 × 34 mm

KnurCAN V2
chrumck/KnurDash
A racing logger for an ND2 Mazda MX-5, integrating wide ranging functionality into one unit:
23 parts1MIT
Questions
How big is the SigClipIndicator PCB?
It measures 30.5 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SigClipIndicator use?
28 parts, built around the LM2903. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SigClipIndicator KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is Mixer/SigClipIndicator/SigClipIndicator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SigClipIndicator design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.