Skip to the content
2 layers69.9 × 45.1 mmRoom cpu, the printed circuit board in 3D

Misc smart house hardware

Size
69.9 × 45.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
30
Pads
91
Tracks, vias
208, 2
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
25 Oct 2017
Updated
11 Oct 2023

Overview

Room cpu is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 69.9 × 45.1 mm with 21 parts on 30 nets, routed with 208 tracks and 2 vias.

It is built around the RS485. Its parts include 6 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

hardware

Misc smart house hardware, kicad designs.

Parts

21
QtyValueFootprintReferences
32,7kResistors_SMD:R_1206_HandSolderingR4, R5, R6
20,1Capacitors_SMD:C_1206_HandSolderingC5, C9
21,0Capacitors_SMD:C_1206_HandSolderingC2, C3
218pFCapacitors_SMD:C_1206_HandSolderingC1, C4
22,2kResistors_SMD:R_1206_HandSolderingR2, R3
116MHzCrystals:Crystal_HC49-U_VerticalY1
11kResistors_SMD:R_1206_HandSolderingR1
1ATMEGA8-PHousings_DIP:DIP-28_W15.24mm_Socket_LongPadsIC1
1BusPin_Headers:Pin_Header_Straight_1x16_Pitch2.54mmP2
1ComparatorPotentiometers:Potentiometer_Trimmer-EVM3ERV1
1FailLEDs:LED_D3.0mmD2
1IOLEDs:LED_D3.0mmD1
1ModbusAddrLPin_Headers:Pin_Header_Straight_2x02_Pitch2.54mmP1
1RS485Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmP3
1ST485Housings_DIP:DIP-8_W7.62mm_Socket_LongPadsU1

More from dzavalishin/hardware

12
  • 2 layers156.2 × 86.4 mmSmart relay board 00, the printed circuit board in 3D

    Smart relay board 00

    dzavalishin/hardware

    Misc smart house hardware

    132 parts3
  • 2 layersDelSol Compander, the printed circuit board in 3D

    DelSol Compander

    dzavalishin/hardware

    Misc smart house hardware

    131 parts3
  • 2 layers124.5 × 81.3 mmDz TapeDelay Control, the printed circuit board in 3D

    Dz TapeDelay Control

    dzavalishin/hardware

    Misc smart house hardware

    125 parts3
  • 2 layers254 × 55.9 mmDelSol Mixer, the printed circuit board in 3D

    DelSol Mixer

    dzavalishin/hardware

    Misc smart house hardware

    124 parts3
  • 2 layers71 × 140 mmDacha Talker, the printed circuit board in 3D

    Dacha Talker

    dzavalishin/hardware

    Misc smart house hardware

    118 parts3
  • 2 layers106.7 × 58.4 mmDz TapeDelay Control, the printed circuit board in 3D

    Dz TapeDelay Control

    dzavalishin/hardware

    Misc smart house hardware

    114 parts3
  • 2 layers108 × 77.5 mmTapeDelay, the printed circuit board in 3D

    TapeDelay

    dzavalishin/hardware

    Misc smart house hardware

    107 parts3
  • 2 layers68.9 × 118.5 mmDz Mixer, the printed circuit board in 3D

    Dz Mixer

    dzavalishin/hardware

    Misc smart house hardware

    105 parts3
  • 2 layers155 × 58 mmMid cpu mega32, the printed circuit board in 3D

    Mid cpu mega32

    dzavalishin/hardware

    Misc smart house hardware

    93 parts3
  • 2 layers90.2 × 72.4 mmDz Distortion Main, the printed circuit board in 3D

    Dz Distortion Main

    dzavalishin/hardware

    Misc smart house hardware

    90 parts3
  • 2 layers20.3 × 200.7 mmStereo Channel, the printed circuit board in 3D

    Stereo Channel

    dzavalishin/hardware

    Misc smart house hardware

    90 parts3

Similar boards

  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers45 × 45 mmMotor, the printed circuit board in 3D

    Motor

    DizzyRobot/DirectServo

    Controller that drives BLDC motor as servo

    48 parts76
  • 8 layers163.5 × 123.5 mmYeti, the printed circuit board in 3D

    Yeti

    PionixPublic/reference-hardware

    BelayBox reference hardware

    278 parts70CERN-OHL-P-2.0
  • 2 layers63 × 46 mmPi485, the printed circuit board in 3D

    Pi485

    bvarner/pi485

    An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

    31 parts41MIT
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT
  • 4 layers105 × 55 mmMotorKit, the printed circuit board in 3D

    MotorKit

    zhbi98/ODriveX

    【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。

    184 parts22MIT
  • 2 layers98.9 × 91.4 mmCoin Cell Tester, the printed circuit board in 3D

    Coin Cell Tester

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    204 parts17MIT
  • 4 layers80 × 100 mmTempCtrl, the printed circuit board in 3D

    TempCtrl

    charlesbaynham/DigitalTemperatureController

    Schematic, PCB and source code for a high-precision digital temperature controller

    186 parts14

Questions

How big is the Room cpu PCB?

It measures 69.9 × 45.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Room cpu use?

21 parts, built around the RS485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Room cpu KiCad files?

From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Boards/room_unit/cpu/room_cpu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Room cpu design in my own project?

Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.