2 layers500 × 500 mm
2 layers500 × 499.9 mm
Lolly
dynamix/lollyWho does not like a LOLLY!
- Size
- 500 × 499.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 555
- Nets
- 1,034
- Pads
- 3,135
- Tracks, vias
- 3,671, 527
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Jun 2024
- Updated
- 9 Jul 2025
Overview
Lolly is an open-source printed circuit board by dynamix, from the dynamix/lolly repository on GitHub. It is a 2-layer board of 500 × 499.9 mm with 555 parts on 1,034 nets, routed with 3,671 tracks and 527 vias.
Its parts include 512 diodes and 8 transistors.
README
pcb/README.mdlolly
Who does not like a LOLLY!
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⣤⡶⠾⠿⠿⠷⠶⣦⣄⡀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⣁⣤⣶⣾⣿⣶⣦⣄⠙⠻⣦⡀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣼⠟⢀⣾⣿⠟⠋⣉⣉⡉⠛⢿⣿⣄⠙⣷⡀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢰⡟⢀⣿⡿⠁⣴⣿⠿⠿⣿⣶⡀⠻⣿⣇⢸⣇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⡇⢸⣿⡇⢸⣿⡇⠀⣦⠈⢿⣿⠀⢻⣿⠀⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠘⣧⠈⣿⣷⡀⠻⣿⣿⡿⢀⣾⣿⠀⣼⣿⠀⡏⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣆⠘⢿⣿⣦⣤⣠⣤⣾⡿⠋⣰⣿⡟⠘⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣄⠙⢷⣄⡉⠛⠿⠿⠛⠋⣠⣴⣿⠟⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⣿⠟⠀⠀⠉⠛⠓⠶⠶⠶⠿⠟⠛⠁⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⢀⣴⣿⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⣠⣿⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⣠⣾⡿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⣼⠿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
Parts
555| Qty | Value | Footprint | References |
|---|---|---|---|
| 512 | APA102 | LED_SMD:LED_RGB_5050-6 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +496 |
| 12 | SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm | Connector_Wire:SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm | VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND, VCC - GND |
| 8 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Q1 in1, Q1 out1, Q2 in1, Q2 out1, Q3 in1, q3 out1, Q4 in1, Q4 out1 |
The 532 most common of 555 parts.
Questions
How big is the Lolly PCB?
It measures 500 × 499.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lolly use?
555 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lolly KiCad files?
From the dynamix/lolly repository on GitHub, at the commit this page was made from: the board is pcb/lolly.kicad_pcb and its schematic pcb/core/core.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lolly design in my own project?
Its repository states no licence, so its author keeps all rights: ask dynamix before reusing the design.
More from dynamix/lolly
4- 2 layers263 × 257.9 mm
- 2 layers262 × 262 mm
- 2 layers73 × 101.5 mm
Similar boards
- 2 layers88.9 × 50.8 mm
- 2 layers191.5 × 136.5 mm
Pu-18
xyzz/pu-18
PCB thickness is 1.2mm. To generate production files you should use KiKit.
554 parts40CC0-1.0 - 2 layers200 × 100 mm
Panelize
hasankarainfo/PCutSpeedCTRL
It provides constant speed operation and remote control of single phase AC motor suitable for operation with 220 vac 50hz. When produced with BTA41 triac switching element, it provides usage up to 40 Ampere.
556 parts1Apache-2.0 - 2 layers150 × 300 mm
- 2 layers131.8 × 131.8 mm
13738-Lumenati 4-pack panel.v10
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
553 parts8MIT - 2 layers416.8 × 346.1 mm
- 2 layers344.7 × 123.1 mm
- 2 layers140 × 140 mm
